Notes On Safety Conventions And Icons - Endress+Hauser PROline FieldCheck Operating Instructions Manual

1 Safety instructions
#
"
!
6
1.4

Notes on safety conventions and icons

The devices are designed to meet state-of-the-art safety requirements, have been tes-
ted, and left the factory in a condition in which they are safe to operate. The devices
comply with the applicable standards and regulations in accordance with EN 61010
"Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures". They can, however, be a source of danger if used incor-
rectly or for other than the designated use.
Consequently, always pay particular attention to the safety instructions indicated in
these Operating Instructions by the following icons:
Warning!
"Warning" indicates an action or procedure which, if not performed correctly, can result
in injury or a safety hazard. Comply strictly with the instructions and proceed with care.
Caution!
"Caution" indicates an action or procedure which, if not performed correctly, can result
in incorrect operation or destruction of the device. Comply strictly with the instructions.
Note!
"Note" indicates an action or procedure which, if not performed correctly, can have an
indirect effect on operation or trigger an unexpected response on the part of the device.
PROline FieldCheck™
Endress+Hauser