Mechanical Construction; Human Interface; Certificates And Approvals; Ordering Information - Endress+Hauser PROline FieldCheck Operating Instructions Manual

PROline FieldCheck™
Design, dimensions
Weight
Display elements
Operating elements
CE mark
Other standards and
guidelines
Endress+Hauser
8.1.6

Mechanical construction

FieldCheck
270 x 130 x 60 mm (length x width x height)
Simubox (without cable)
120 x 60 x 30 mm (L x W x H)
Softcase
400 x 180 x 300 mm (L x W x H)
1.6 kg
8.1.7

Human interface

• Liquid crystal display: illuminated, four lines with 16 characters per line
• Selectable display of different measured values and status variables
Local operation with three optical keys (O, S, F)
8.1.8

Certificates and approvals

The measuring system is in conformity with the statutory requirements of the EC Direc-
tives. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
"Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures".
EN 61326/A1 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
8.1.9

Ordering information

The E+H service organisation can provide detailed ordering information and information
on the order codes on request.
8.1.10

Accessories

Various FieldCheck accessories can be ordered separately from Endress+Hauser
(s. page 22). The E+H service organisation can provide detailed information on the
order codes of your choice.
8.1.11

Supplementary documentation

SI 030D/06/en


8 Technical data
25