Features Of The App; Privacy Policy; Disconnecting The Device And Deleting Data From The App; Problems With The App? - Faq - Parkside Performance PPKSA 40-Li A1 Translation Of The Original Instructions

2. Press the button for the charge level indi-
26)
cator (
The device is now activated and the
Smart­LED­
ly).
3.­Enable­Bluetooth
4. Open the Parkside app.
5. Select .
If you have already connected
the Smart Performance battery
you are using the device with to the
app,­you­will­find­the­device­in­the­list­
of connected devices.
6. Select the device from the list.
If it is not available, connect the de-
vice to the app as follows:
1. Select " Add device"­or,­if­you­have­
already­paired­devices/batteries,­the­
at the top right.
2. Follow the instructions in the app. The
app scans the surroundings for available
devices.
3. Select the device you wish to add.
4. You can rename the device if necessary.
Confirm­the­successful­connection­with­
"Done"­or­select­"Add more devices"­
directly.
The device is now listed under
connected devices and can be selected.
Upgrading­the­firmware­can­change­
the features of the app.

Features of the app

Selecting the device in the list under
will take you to the overview page.
For more detailed information on in-
dividual­points,­select­the­
28)­flashes­(brief-
(
on your smartphone.
®
in your
.

Privacy policy

You­can­find­the­complete­"
cy"­at­
.
Disconnecting the device and
deleting data from the app
Go to to select the device you want
to remove and whose data you want to
delete,­press­and­hold­the­selection­and­
swipe from the right to the left edge of the
screen .
Problems with the app? –
FAQ
1. Select .
­Frequently­Asked­Questions.
2. Select
Here­you­will­find­frequently­asked­
questions and the corresponding
answers.
Maintenance and
cleaning

Maintenance and cleaning

work must always be carried
out with the motor switched
off and the batteries removed.
Danger of injury!
Leave any maintenance and servic-
ing work not covered by this man-
ual to our Service-Center. Use only
original spare parts.
Allow the machine to cool down
before all maintenance and clean-
ing works. Danger of burn injuries!
Use cut-protection gloves
when handling the chain or
the chain bar. Risk of cuts!
GB MT
Privacy Poli-
57