Function - STEINEL professional MD-8 ECO COM1 Manual

6. Function

GB
Factory settings
The factory settings are activated when the sensor is put
into operation for the first time as well as after resetting via
the Smart Remote APP.
Twilight level: 500 lux
Time setting for COM1: 5 min
Fully / semi-automatic mode: fully automatic
Twilight setting
The chosen response threshold can be set from approx.
2 to 1,000 lux.
Daytime operation
When movement is detected, the sensor switches the load
ON irrespective of ambient brightness.
Teach-IN
The Teach-IN function is to be selected at the level of light
at which you want the sensor to respond to movement
from now on. The level of ambient brightness measured
in this way will be saved after 10 seconds. The load is
deactivated during this period.
Time setting
The chosen stay-ON time can be set from a minimum of
5 seconds to a maximum of 60 minutes. If no movement
is detected, the sensor switches OFF after the stay-ON
time expires.
Operating mode
Semi-automatic mode
The light now only switches OFF automatically. Light is
switched ON manually. Light must be requested using the
button and stays ON for the time set.
– 63 –
Contents