Function Operation; Maintenance & Care; Declaration Of Conformity; Manufacturer's Warranty - STEINEL HF 3360 Information

• Make DALI connection.
– Surface-mounted power supply lead (Fig . 4 .5)
– Concealed power supply lead (Fig . 4 .6)
• Insert fastening screws and mount connection module.
• Fit sensor and connection module together and screw into place
• Switch ON power supply. (Fig . 4 .6)
• Fit designer trim.
• Detection zone / reach (Fig . 4 .7)
6 . Function / operation
Once you have connected the unit, closed the housing and fitted the lens, you are
ready to put the system into operation.
The sensor is put into operation in accordance with the applicable DALI 2 standard. All
functions and commands are available from DALI standard IEC 62386 Part 101, Part
103, Part 303 and Part 304. The motion detection values and light levels measured by
the sensor can be requested from the DALI Application Controller. Automatic or time-
based cyclical transmission can also be selected.
You will find detailed information in the interface description on the Internet at:
DALI-2.steinel.de
LED function:
Red LED
Initialisation: LED flashes once every 2 seconds
Normal mode: LED stays OFF.
DALI identification: LED flashes once a second.
7 . Maintenance / care
The product requires no maintenance.
The sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems. The surface can be cleaned with a damp cloth (without detergents) if dirty.
8 . Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment
as domestic waste.
G B
1 3
Y E A R
MANUFACTURER'S
WARRANTY
18
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.

9 . Declaration of Conformity

Hereby, STEINEL Vertrieb GmbH declares that the radio equipment type HF 3360
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.steinel.de

10 . Manufacturer's Warranty

As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www .steinel-professional .de/garantie
If you have a warranty claim or would like to ask any question regarding your product,
you are welcome to call us at any time on our Service Hotline 01733 366700.
5
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
19