Rockwell Automation PowerFlex 7000 Instructions Manual page 119

8. Lift and transport the main fan assembly from the top of the cabinet.
9. Remove and retain the hardware that attaches the fan mounting flange
to the top of the cabinet.
10. Remove and retain the M6 x 20 (6 N•m [4 lb•ft]) hardware that attaches
the top plate to the cabinet and remove the top plate.
Remove the Redundant Ziehl-Abegg Fan Assembly
Follow these instructions to remove the redundant Ziehl-Abegg fan assembly.
1. Remove and retain the hardware (6 x M8 bolt, 4 x M8 nut) from two
horizontal support brackets.
2. Remove and retain the hardware (4 x M6 nut) from two vertical support
brackets.
Rockwell Automation Publication 7000-UM202H-EN-P - November 2023
Chapter 2 Power Component Definition and Maintenance
Fan Mounting Flange
Top Plate
M8 bolt/nut:
25 N•m (18 lb•ft)
M6 nut:
10 N•m (7 lb•ft)
119