Table of Contents
Advertisement
5.1 Call Settings
5.1.1 Call Resident
Steps
Note
Only when the Call Management Center function is enabled, should the call center button be
displayed. For details, see the configuration guide.
1. Select Call →
to enter the residents calling page.
2. Enter the calling number.
The calling number format should be x-x-x-xxx. For example, the calling number of Community 1,
Building 2, Unit 3, and Room 405 is 1-2-3-405.
Note
The community No. can be omitted.
3. Select the call button to start an audiovisual call.
4. Optional: Select
5.1.2 Call Indoor Extension/Indoor Station
Select Call on the main page to enter the calling page.
If you install indoor station and indoor extensions at home, you can call the indoor extension via
your indoor station.
Enter 【0-indoor extension No.】 on the indoor station to start calling.
Enter 【0-0】 to call the indoor station from the indoor extension.
5.1.3 Receive Call
The indoor station and indoor extension can receive calls from the analog doorphone, the door
station, the main station or iVMS-4200 Client.
On the call from door station page, there are 2 unlock buttons: Unlock 1, and Unlock 2. When you
select Unlock 1, the building gate will open by default, and when you select Unlock 2, the door
connected to the door station with the secure control door unit will open.
You can customize touch buttons for capturing function to capture and save the live view picture
when speaking with the door station.
Network Indoor Station User Manual
Chapter 5 Local Operation
to call management center.
9
Advertisement
Table of Contents
