Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-KH6320Y-WTPE2
Summary of Contents for HIKVISION DS-KH6320Y-WTPE2
- Page 1 Two-Wire Indoor Station User Manual...
- Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
- Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
- Page 4 Two-Wire Indoor Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...
- Page 5 Two-Wire Indoor Station User Manual Regulatory Information EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
- Page 6 Two-Wire Indoor Station User Manual Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité...
-
Page 7: Table Of Contents
Two-Wire Indoor Station User Manual Contents Chapter 1 About this Manual ...................... 1 Chapter 2 Activation ........................2 2.1 Activate Indoor Station ......................2 Chapter 3 Configuration Guide ....................3 3.1 Typical Application ......................... 3 3.2 Local Operation ........................3 3.2.1 Quick Operation ...................... -
Page 8: Chapter 1 About This Manual
Two-Wire Indoor Station User Manual Chapter 1 About this Manual Get the manual and related software from or the official website (http://www.hikvision.com). Product Model Network Indoor Station DS-KH6320Y-WTPE2... -
Page 9: Chapter 2 Activation
Two-Wire Indoor Station User Manual Chapter 2 Activation 2.1 Activate Indoor Station You can configure and operate the indoor station after activating the device. Steps 1. Power on the device. It will enter the page of Language. Figure 2-1 Language 2. -
Page 10: Chapter 3 Configuration Guide
Two-Wire Indoor Station User Manual Chapter 3 Configuration Guide 3.1 Typical Application The typical application of the device is shown as below. Figure 3-1 Typical Application Wire the door station to the indoor station with 2-wire cables. You can activate door station by indoor station. Set the open duration and other parameters by indoor station. - Page 11 Two-Wire Indoor Station User Manual Figure 3-2 Select Language 2. Connect to Mobile Phone. Figure 3-3 Connect to Mobile Phone - If you would like to connect your device to your mobile phone, tap Connect. You will then set Wi-Fi parameters.
- Page 12 Two-Wire Indoor Station User Manual - Or you can tap Skip to skip this step and connect later. The device will then automatically check the connection between the door station and indoor station. If the two devices are successfully paired, the indoor station will then enter the menu page. Note If you skip this step, you will receive a notice of Connecting to App every day the device lights up for the first time.
-
Page 13: Basic Settings
Two-Wire Indoor Station User Manual Figure 3-5 Add Device to Mobile Phone 5. After adding your device to your mobile phone, the device will check the connection with the door station. If two devices pair successfully, the indoor station will then enter the menu page. ●... -
Page 14: Sound Settings
Two-Wire Indoor Station User Manual Figure 3-6 Wi-Fi Settings Select an Wi-Fi and connect. 3.2.3 Sound Settings Call Settings You can set the ringtone, ring duration, call forwarding time on call settings page. Steps 1. Tap Settings → to enter the call settings page. - Page 15 Two-Wire Indoor Station User Manual Figure 3-7 Call Settings 2. Set corresponding parameters. Ringtone There are 3 ringtones by default, and you can custom and import at most 4 ringtones via Batch Configuration Tool or iVMS-4200 Client Software. Ringtone Duration: The maximum duration of indoor station when it is called without being accepted.
- Page 16 Two-Wire Indoor Station User Manual Figure 3-8 Main Page Note Before enabling Auto-answer, the function of Leave Message needs to be enabled. Tap Settings → → to enter the shortcut settings page. Eanble Leave Message and go back to calling settings page to enable Auto-answer. Do Not Disturb Device Select All and all devices will not disturb this device.
-
Page 17: General Settings
Two-Wire Indoor Station User Manual Steps 1. Tap Settings → → Volume Settings to enter the volume settings page. 2. Set the microphone volume, prompt sound volume, and the call volume of the indoor station. 3. Optional: Enable Touch Sound to turn on the sound when you touch device screen. 3.2.4 General Settings You can set time and date, format, system language and adjust the screen brightness on this page. -
Page 18: Synchronize Time
Two-Wire Indoor Station User Manual Clean Screen Enable Clear Screen and the screen will be locked for 30s. And you can clear the screen within the time duration. Note After enabling Clear Screen function, press and hold the Unlock key to exit the clear screen ●... -
Page 19: Advanced Settings
Two-Wire Indoor Station User Manual 3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No. Note The default unit of synchronizing interval is minute. ● The time zone can be configured as well if the NTP is not enabled. ●... - Page 20 Two-Wire Indoor Station User Manual Restore Default Settings Tap Restore Default Settings to restore the default settings and reboot the system. Restore All Tap Restore All to restore all parameters and reboot the system. Upgrade Tap Upgrade to get the upgrade package online. Wizard Tap Wizard and set the language, password reset method, network parameters, indoor station parameters, platform service, and related device.
-
Page 21: Chapter 4 Operation Guide
Two-Wire Indoor Station User Manual Chapter 4 Operation Guide 4.1 Local Operation 4.1.1 Menu You can also check the status of on the menu page. You can view the status of the Hik-Connect, Wi-Fi, door station and remote operation of APP. Figure 4-1 Menu Note When the App is remotely operating, it will be prompted on the menu page. -
Page 22: Leave Message
Two-Wire Indoor Station User Manual On the call from door station page, there are 2 unlock buttons: Unlock 1, and Unlock 2. When you tap Unlock 1, the building gate will open by default, and when you tap Unlock 2, the door connected to the door station with the secure control door unit will open. -
Page 23: Live View
Two-Wire Indoor Station User Manual Tap Message on the main page to view the messages. 4.1.4 Live View On the live view page, you can view the live video of added door station. Steps Note Make sure the door station is well-connected. 1. -
Page 24: Information Management
Two-Wire Indoor Station User Manual 4.1.5 Information Management You can view public notice, visitor message, and capture log on information management page. Tap Message to enter the information management page. Delete a Log: Hold the item, you can delete it. Clear Logs: Hold the item, you can clear all logs. - Page 25 UD33356B-A...