Daikin Clima-Flex CLIC Series Installation, Operation And Maintenance Manual page 91

Mother /Son Logic
• Alarms Control: An alarm is any values that is above or under a predetermined value or conditions.
Figure 52. Logic Box of Alarms control
Alarms are configured in MCXShape. You set the alarm name, reset type, delay and actions in the MCXShape. When you drag an alarm
from the" Resources" into the logic area you retain all these settings.
The main logics of the alarms are:
Serious Alarm: when phase protector trips.
Figure 53. Logic of Phase Protector Switch
HP Alarms: The HP alarm takes the value of the HP sensor, and it is compared with the High pressure Alarm set point (adjusted by user)
and when it happens the Alarms trips.
Figure 54. Logic of HP Alarm
www.clima-flex.com iom-clic-cf-eng
91