Table of Contents
Advertisement
Controller Use
GRAPHICAL USER INTERFACE
Control states
The configured devices will display this screen by default.
1. Control status button: Can be active or inactive by a digital
input or inactive by the pGDTouch terminal.
2. Selection of temperature measurement type: (*1Fahrenheit or
Celsius).
3. Date.
4. Time
TRENDS
The pGDTouch terminal has in memory the information about
the temperature readings of the injection and return sensor of the
main unit, as well as the injection and return temperatures of all
enabled units. When pressing the trend button, the user will be
redirected to a menu where he/she can select the type of trend
to display.
In the main unit section, the injection and return readings of the
main unit will be displayed. In the unit section, the injection and
return sensor readings of all units will be displayed.
The trend properties that can be edited are the duration, high and
low limits. These properties are editable in the navigation menu.
The pGDTouch terminal saves a reading of each of the above
temperatures every 180 seconds and can save more than
100,000 samples of data before starting to overwrite the old data.
With these parameters the pGDTouch terminal can store data for
the last 7 months.
www.clima-flex.com
This menu shows the current temperature in the equipment
ALARMS PAGE
When the alarms button is clicked, the user will be presented with
a page showing whether or not alarms are present.
Pressing the active alarms button will display the alarm log.
This screen shows the records of the alarms occurring in the
short period of time of each alarm.
71
iom-clic-cf-eng
Advertisement
Table of Contents
