Table of Contents
Advertisement
2.8
Safety instructions for installing, commissioning and maintenance
2.9
Guarantee conditions
•
The operator will ensure that any installation,
commissioning and maintenance work is car-
ried out by authorised, qualified specialists who
have gained sufficient information by an in-depth
study of the operating instructions.
•
Only work on the machine when it is idle and
cannot be switched on again
•
Ensure that you follow the procedure for decom-
missioning the machine described in the operat-
ing instructions.
•
Fit or start up safety and protective devices
again immediately after finishing work.
•
Conversion work or modifications to the ma-
chine are only permissible with the manufactur-
er's consent.
•
Only use original parts or parts approved by the
manufacturer. The use of other parts may invali-
date liability for any consequences arising.
•
Keep unauthorised people away from the ma-
chine
The manufacturer's guarantee or warranty will no
longer apply in the following cases:
•
Improper use
•
Not complying with these instructions as well as
operating Instructions frequency converter
•
Operation by insufficiently qualified staff
•
Using spare parts that have not been approved
by Gardner Denver Schopfheim GmbH
•
Unauthorised modifications to the machine or
the accessories supplied by Gardner Denver
Schopfheim GmbH
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Safety
9
|
Advertisement
Table of Contents
