Commissioning And Decommissioning; Commissioning - Gardner Denver Elmo Rietschle C Series Original Operating Instructions

Commissioning and decommissioning

6 Commissioning and decommissioning
6.1

Commissioning

18
|
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
WARNING
Improper use
May lead to severe or fatal injuries. Therefore be
sure to obey the safety instructions.
CAUTION
Hot surfaces
When the machine is at operating temperature
the surface temperatures on the components
(Fig. 2/Q) may go above 70 °C.
You must avoid touching the hot surfaces (mar-
ked with warning plates).
CAUTION
Noise emission
The highest noise pressure levels measured as
per EN ISO 3744 are given in Section 9.
When spending a long time in the vicinity of the
running machine use ear protectors to avoid
permanent damage to your hearing.
NOTICE
Wait until the machine stops
The machine must only be switched on again
after it stops.
NOTICE
The oil level in the sight glasses (Fig. 6/I) must be
checked.
The machine must be switched off and vented to
atmospheric pressure to top up the oil.