Maintenance and repair
7.2.4 Integrated frequency converter
7.3
Repair/ Service
Fig. 12 Clearance certificate 7.7025.003.17
26
|
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
For maintainance of the integrated frequency
converter (Fig. 2/V) see enclosed operating in-
structions 610.00260.40.000.
The operating instructions are available under
the following link:
• Download the PDF File:
http://www.gd-elmorietschle.com
¦ Downloads
¦ Product Documents
¦ Frequency Converters ¦ Manuals
a) For on site repair work the frequency converter
must be disconnected from the mains by a
qualified electrician so that it cannot be started
up again accidentally. For repairs use the manu-
facturer, its branch offices or authorised dealers.
Please contact the manufacturer for the address
of the service centre responsible for you (see
Manufacturer's address).
NOTICE
For each machine that is sent to an Elmo Rietschle
Service centre for inspection, maintenance or
repair, a fully completed, signed declaration of
harmlessness must be enclosed.
The declaration of harmlessness is part of the
supplier's documentation.
b) After a repair or re-commissioning, the actions
listed under „Installation" and „Commissioning"
must be carried out as for initial commissioning.