Basic Settings; Automatic Safety Cut-Out; Care And Cleaning - NEFF C49C62 3 Series Instruction Manual

Basic settings

Your appliance has various basic settings, which are preset at
the factory. You can change the basic settings as you require.
If you want to cancel all the changes, you can restore the
factory settings.
You can only change the basic settings if the appliance is
switched on.
If required, turn the operating mode selector to the
1.
Press and hold the info button until "Select language"
±
2.
appears in the text display.
Press the ± button repeatedly until the desired basic setting is
3.
displayed (e.g. "Audible signal off").
Use the temperature selector to change the basic setting
4.
(e.g. to "Audible signal duration 2 minutes").
Press and hold the info button for 3 seconds.
±
5.
The change is saved.
You can change the following basic settings:
Basic settings menu
Sub menu Basic setting
Select language Additional languages are
possible.
Childproof lock Lock is not activated
Lock is activated
Permanent lock is activated
* Restore the appliance to the factory settings:
all changes to the basic settings are deleted
■
Memory is cleared
■
automatic calibration is carried out again
■

Automatic safety cut-out

The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
The length of time after which your appliance switches itself off
depends on the settings that you make.

Care and cleaning

In this section, you will find information on
Care and cleaning of your appliance
■
Oven cleaning aid EasyClean®
■
Descaling
■
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Basic settings menu
Sub menu
Audible signal
duration
position.
Û
Auto start
Adjust individually
Water hardness
range
Setting
symbol
Steam heating up
signal
™‚‹
Factory settings*
™‚‚
™ƒ‚
* Restore the appliance to the factory settings:
all changes to the basic settings are deleted
■
Memory is cleared
■
automatic calibration is carried out again
■
flashes in the temperature display. Cooking is interrupted.
‹‹‹
Turn the operating mode selector back to the
deactivate the automatic safety switch-off function. You can now
make new settings.
Caution!
Risk of surface damage: Do not use
harsh or abrasive cleaning agents
■
oven cleaners
■
corrosive or aggressive cleaners, or those containing
■
chlorine
cleaning agents with a high alcohol content
■
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Basic setting
Audible signal off
Audible signal duration
30 seconds
Audible signal duration
2 minutes
Audible signal duration
10 minutes
off
on
- +
ÙÙÙØÙÙÙ
softened
1-soft
2-medium
3-hard
4­very hard
off
on
Do not restore
Restore
Û
Setting
symbol
™„‹
™„‚
™„ƒ
™„„
™...‹
™...‚
...
™†
™‡‹
™‡‚
™‡ƒ
™‡„
™‡...
™ˆ‹
™ˆ‚
™‰‹
™‰‚
position to
21