Table of Contents
Advertisement
Switching off the appliance
Turn the operating mode selector to the
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature
Text display
display
Residual heat
•
high
Residual heat
œ
low
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
Press and hold the
±
info button for 3 seconds to go to the
1.
basic settings menu.
The text display shows "Select language: German". If the
appliance controls are locked, you must unlock them first.
Press the
info button repeatedly until the current basic
±
2.
setting for the relevant submenu is displayed on the text
display (e.g. "Audible signal off").
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g. "Audible signal 2 minutes").
Press and hold the
info button for 3 seconds.
±
4.
Your basic setting is saved.
Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
find out how to activate rapid heat up
■
Clock function
Timer
Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
Rapid heat up
f
Û
position. The
Meaning
Residual heat high
(above 120 °C)
Residual heat low
(between 60 °C and 120 °C)
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g.
:
hours)
‚
„‹
The appliance switches off automatically at a set time (e.g.
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Shortens the heat up time
You can change the following basic settings:
Basic settings menu
Submenu
Basic setting
Language
Select language
English
Childproof lock
Appliance controls
unlocked
Appliance controls locked
Appliance permanently
locked
Audible signal
Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the
deactivate it.
Clock display
&ORFN IXQFWLRQ EXWWRQ
Setting
symbol
™‚‹
™‚‚
™ƒ‚
™‚‹
™„‚
™„ƒ
™„„
flashes in
‹‹‹
position to
Û
5RWDU\ VHOHFWRU
:
)
‚ƒ
„‹
9
Advertisement
Table of Contents
