Table of Contents
Advertisement
Empty evaporator dish
After 20 seconds, "Empty evaporator dish" appears in the text
display.
Open the appliance door.
1.
Thoroughly rinse out the cleaning sponge.
2.
Remove the remaining water from the evaporator dish using
3.
the cleaning sponge.
Close the appliance door.
4.
2nd rinse
Press the Start button.
The appliance starts rinsing. "2nd rinse" appears in the display.
Removing the remaining water
After 20 seconds, "End" and "Empty evaporator dish" appear in
the text display.
Open the appliance door.
1.
Remove the remaining water from the evaporator dish using
2.
the cleaning sponge.
Wipe out the cooking compartment using the cleaning
3.
sponge and then dry with a soft cloth.
Turn the operating mode selector back to the
4.
To turn off the appliance, press in the operating mode
5.
selector so that it clicks into place.
Descaling is complete.
Cancelling the descaling
Note: After cancelling the descaling, you must rinse the
appliance twice. The appliance is locked against other
applications until the second rinsing operation is complete.
Press and hold the Stop button to cancel the descaling
1.
process.
To ensure that no descaling solution remains in the
appliance, it must be rinsed twice after a cancellation.
Press the Start button.
2.
"Empty evaporator dish and refill water tank" appears in the
text display.
Now proceed as described in the "Emptying the evaporator
dish and refilling the water tank" section.
Descaling the evaporator dish only
You can also use "Descale" if you do not wish to descale the
whole appliance, but only the evaporator dish in the cooking
compartment.
The only difference is as follows:
Prepare a descaling solution by mixing 100 ml water and
1.
20 ml liquid descaler.
Completely fill the evaporator dish with descaling solution.
2.
Fill the water tank with water only.
3.
Start "Descale" as described.
4.
You can also descale the evaporator dish manually.
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
Removing the appliance door
Push in the two lock bolts on the underside of the door
1.
(Fig. A).
Open the appliance door a little (Fig. B).
2.
Lift the door handle slightly using both thumbs and lift out the
3.
appliance door upwards.
24
Fitting the appliance door
Refit the appliance door after cleaning.
Fit the appliance door in a slanted position over the guide
1.
rollers (Fig. C).
Use both thumbs to slightly lift the door handle to the vertical
2.
position until the appliance door engages.
Close the appliance door.
3.
Push out the two lock bolts on the underside of the door
4.
(Fig. D).
position.
Û
Cleaning the rails
The rails can be removed for cleaning.
:
Risk of burning due to hot components in the cooking
compartment!
Wait until the cooking compartment has cooled down.
Detaching the rails
Note: Swing the front of the rail as far as possible (until you feel
resistance), because otherwise the appliance side panel may
become bent.
Carefully press the front of the rail upwards until it becomes
1.
detached, and release it from the holder at the side (fig. A).
Detach the rail from the holder and remove it (fig. B).
2.
Clean the rails with washing-up liquid and a sponge/brush
3.
or
Clean the rails in the dishwasher.
Advertisement
Table of Contents
