Table of Contents
Advertisement
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode selector back to the
1.
Press the
clock function button to exit the clock function.
KJ
2.
End of operation
Automatic switch-off at a set time. This function is only possible
for operating modes that do not use steam.
Set the operating mode and temperature. Press the Start
1.
button.
The appliance heats up.
Press the
clock function button repeatedly until the
KJ
2.
and
symbols light up.
y
Set the end of operation using the rotary selector
3.
(e.g.
:
o'clock).
‚ƒ
„‹
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
Turn the operating mode selector back to the
1.
Press the
clock function button to exit the clock function.
KJ
2.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
Bear in mind that food that spoils easily must not stay in the
cooking compartment for too long.
Preselection mode is not possible with some of the automatic
programmes.
When
Steam cooking, the cooking time does not start until
é
the heating up time has elapsed. The end of operation which
was set is therefore delayed by the length of time required for
heating-up.
Automatic programmes
The automatic programmes enable you to prepare food very
easily. There are 16 programme groups containing a total of
70 programmes.
In this section, you will find out
how to set one of the automatic programmes
■
hints and tips on the programmes
■
Which programmes you can set (programme tables)
■
Set the operating mode and temperature.
1.
Press the clock function button repeatedly until the
2.
position.
symbols light up.
Û
x
Set the cooking time with the rotary selector
3.
(e.g.
Press the clock function button repeatedly until the
4.
and
y
Set the end of operation using the rotary selector
5.
(e.g.
Press the Start button.
6.
The appliance waits until the appropriate time to switch on (in
the example at
KJ
The appliance switches off automatically at the time set for the
end of operation (
flashes.
Turn the operating mode selector back to the
1.
Press the clock function button to end the preselection mode.
2.
Setting the clock
You can only change the clock when no other clock function is
active.
Press the
1.
the
KJ
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Û
position.
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Setting a programme
Select the correct programme from the programme tables.
Follow the instructions for the programmes.
Example in the picture: You want to steam 500 g fresh chicken
breast.
"Poultry" programme group
■
Programme "Chicken breast, fresh, steamed"
■
:
hours).
‚
„‹
symbols light up.
‚ƒ
:
„‹
).
:
).
‚‚
‹‹
‚ƒ
:
„‹
). A signal sounds and the
KJ
clock function button repeatedly until
and
symbols light up.
3
and
KJ
KJ
y
symbol
position.
Û
clock function button
KJ
13
Advertisement
Table of Contents
