Table of Contents
Advertisement
Turn the temperature selector to change the default
3.
temperature.
Operating mode
Temperature range Default cooking
Steam
35 - 100 °C
CircoSteam®
120 - 230 °C
Hot air
30 - 230 °C
Reheat
100 - 180 °C
Prove
35 - 50 °C
Defrost
35 - 60 °C
Slow cook
60 - 120 °C
Plate warming
30 - 70 °C
Keep warm
60 - 100 °C
For operating modes that use steam, a default cooking time
appears in the electronic clock. The
time) symbols light up.
Turn the rotary selector to change the default cooking time.
4.
The new cooking time is saved automatically after 3 seconds.
You can also set the cooking time for operating modes that
do not use steam (see section: Electronic clock).
Press the Start button.
5.
If you do not press the Start button, a signal sounds and
"Press Start button" appears in the text display.
When using
é
Steam cooking, the cooking time does not start
until the heating-up time has elapsed.
"Fill water tank?" message
This message appears if you set an operating mode and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
Temperature reached (fig. A)
■
Appliance reheating (fig. B)
■
Current temperature
Press the
info button.
±
The current temperature is displayed for 3 seconds.
Displaying and changing the cooking time.
Press the
clock function button repeatedly until the
KJ
and
symbols light up. The current cooking time is displayed.
x
Turn the rotary selector to change the cooking time. The
change is saved automatically.
Changing the temperature
You can change the temperature at any time. To change the
temperature, turn the temperature selector until the required
temperature is displayed.
Pause
Briefly press the Stop button to interrupt cooking (pause). The
cooling fan may continue running. Press the Start button to
restart.
time
20 minutes
30 minutes
-
10 minutes
30 minutes
30 minutes
-
-
-
and
(cooking
KJ
x
KJ
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the Start
button to restart.
If you have switched on the Auto start, there is no need to
restart the appliance (see section: Basic settings).
"Fill water tank" message
If the water tank is empty, a signal sounds. "Fill water tank"
appears on the display. Cooking is interrupted.
Open the appliance door carefully.
1.
N.B.: Hot steam will escape.
Remove the water tank, fill up to the "max" mark and slide the
2.
tank back in.
Press the Start button.
3.
Switching off the appliance
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to stop the cooking operation.
If you have set a cooking time, cooking is ended automatically.
A signal sounds. Press the
the signal.
The cooling fan may continue to run when you open the
appliance door.
Turn the operating mode selector back to the
push it in to turn off the appliance.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature display
Text display
Residual heat high
•
Residual heat low
œ
After each use
Emptying the water tank.
Open the appliance door carefully.
1.
Hot steam will escape.
Remove and clean the water tank.
2.
Thoroughly dry the seal in the tank cover and the tank recess
3.
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
Leave the appliance door ajar until the appliance has cooled
1.
down.
Once it has cooled down, wipe out the cooking compartment
2.
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
Wipe away any drops of water which may have dripped onto
3.
the lower bottom panel when the appliance door was
opened.
Remove food residues in the cooking compartment as soon
4.
as the appliance has cooled down. Burnt-on remains will be
much harder to remove later.
Wipe units and handles dry where condensation has formed.
5.
clock function button to stop
KJ
position and
Û
11
Advertisement
Table of Contents
