Table of Contents
Advertisement
Switching off the appliance
Turn the operating mode selector to the
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature dis-
Meaning
play
Residual heat high (above 120 °C)
•
Residual heat low (between
œ
60 °C and 120 °C)
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
Press and hold the
info button for 3 seconds to go to
±
1.
the basic settings menu.
In the temperature display,
Press the
±
info button briefly and repeatedly until the setting
2.
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g.
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g.
™„„
Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
find out how to activate rapid heat up
■
Clock function
Timer
Q
Cooking time
x
End of operation
y
Preset operation
Clock
3
Rapid heat up
f
Û
position. The
appears.
™‚‹
).
™„ƒ
).
Use
You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
The appliances switches off automatically after a cooking time setting has elapsed
(e.g.
:
hours)
‚
„‹
The appliance switches off automatically at a set time (e.g.
The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
Setting the clock
Shortens the heat up time
Press and hold the
±
info button for 3 seconds.
4.
Your basic setting is saved.
You can change the following basic settings:
Basic settings menu
Submenu
Basic setting
Childproof lock
Appliance controls
unlocked
Appliance controls locked
Appliance controls perma-
nent lock
Audible signal
Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
flashes in the temperature display. Appliance operation is
‹‹‹
interrupted.
Turn the operating mode selector to the
deactivate it.
Clock display
&ORFN IXQFWLRQ EXWWRQ
Setting
symbol
™‚‹
™‚‚
™ƒ‚
™‚‹
™„‚
™„ƒ
™„„
Û
position to
5RWDU\ VHOHFWRU
:
)
‚ƒ
„‹
7
Advertisement
Table of Contents
