Table of Contents
Advertisement
Use the temperature selector to set the temperature to
8.
240 °C.
Press the
VarioSteam button repeatedly until the
Ÿ
9.
symbols light up (see section: VarioSteam - steam-assisted
cooking).
Press the
Start button.
ƒ
10.
Switch off the appliance if the water tank is empty. To do
11.
this, turn the operating mode selector to the
and push it in.
The remaining water will be pumped out of the evaporator
system. The
symbol lights up.
Ì
Operating the appliance
In this section, you can read about
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how to fill and empty the water tank
■
when your appliance switches off automatically
■
Switching on the appliance
Press the operating mode selector to make it pop out.
This switches on the appliance, and it is now ready for use.
The
symbol lights up.
~
Selecting operating mode and temperature
:
Risk of scalding!
by hot water. The water in the water tank may become hot.
Empty the water tank before starting operating modes that are
not steam-assisted.
Notes
The operating modes
/
■
EasyClean® can only be started if the cooking compartment
has cooled down. There must be no residual heat (
showing in the temperature display.
For steam-assisted applications, you must fill the water tank
■
(see section: Filling and emptying the water tank).
Switch on the appliance.
1.
Turn the operating mode selector until the desired operating
2.
mode is selected.
Turn the temperature selector to change the default
3.
temperature.
Note: If no default temperature is displayed, the temperature
for your selected operating mode is a fixed setting. You
cannot change this temperature.
Press the
Start button.
ƒ
4.
10
Û
off position
Low-temperature cooking and
Emptying the water tank (see section: Filling and emptying
12.
the water tank)
Afterwards, wipe the cooled cooking compartment with hot,
• ž Ÿ
13.
soapy water.
Note: Remove limescale marks with a cloth soaked in
vinegar, then wipe over with clean water and rub dry with a
soft cloth.
Clean the outside of the appliance with a soft, damp cloth
14.
and soapy water.
Notes
Depending on the operating mode that you have selected,
■
you will hear a pumping noise after the operation has started.
The appliance is checking whether the pumps are working
correctly.
If you cannot start a steam-assisted application, check
■
whether the water tank has been filled and fully inserted.
Operating mode
3
CircoTherm®*
Top/bottom heat*
%
Circotherm intensive*
0
4
Circo-roasting*
Full-surface grill
+
Full-surface grill (inten-
+
sive)**
(
Centre-area grill
>
Centre-area grill (inten-
(
•
or
œ
)
sive)**
Bottom heat
$
Low-temperature cooking Fixed setting
/
CircoTherm® Eco
"
EasyClean®
>
ä
Reheat
* In this operating mode, you can activate steam operation
** Turn the temperature selector beyond 275 °C.
in the temperature display
Changing the operating mode
Turn the operating mode selector until the desired operating
1.
mode is selected.
Turn the temperature selector to change the temperature.
2.
Press the
3.
Current temperature
Press the
±
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Default temper-
ature in °C
160
170
220
170
220
Fixed setting
180
Fixed setting
200
160
Fixed setting
120
Start button.
ƒ
info button. The current temperature appears for
Temperature
range in °C
40 - 220
50 - 275
50 - 275
50 - 250
50 - 275
50 - 275
50 - 225
ü ü ü
40 - 200
"'†
80 - 180
‚Ÿ£
appears
Advertisement
Table of Contents
