Table of Contents
Advertisement
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft, wet
cloth.
Use the # touch button to switch on the appliance.
4.
Set the heating type and temperature, then start the
5.
appliance operation. ~ "Setting and starting the
appliance operation" on page 13
Settings
Top/bottom heating ƒ
Heating type
Temperature
240 °C
Cooking time
1 hour
Keep the kitchen ventilated while the appliance is
6.
heating up.
Use the # touch button to switch off the appliance
7.
after the indicated cooking time.
Wait until the cooking compartment has cooled
8.
down.
Clean the smooth surfaces with soapy water and a
9.
dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the # touch
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Display
Residual heat high
Residual heat low
Notes
Certain indicators and instructions (e.g. about
■
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
After the appliance has completed an operation, you
■
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
Switch off your appliance when you do not need to
■
use it. If no settings are made for a long time, the
appliance switches off automatically.
Setting and starting the appliance operation
Example: ‚ CircoTherm hot air at 170 °C
Touch the # touch button to switch on the
1.
appliance.
You go directly to the ¢ Types of heating menu.
Swipe to the left or right to select the type of heating.
2.
Touch the bottom line.
3.
Swipe to the left or right to select the temperature.
4.
Operating the appliance
Temperature
above 120 °C
between 60 °C und 120 °C
en
13
Advertisement
Table of Contents
