Advertisement
Step 17
å
Using your hammer, gently tap four LEVELERS (46E) completely into the holes in the ENDS (B and C).
å
NOTE: Adjustments to the LEVELERS will be made later in assembly once your unit is standing upright.
å
Fasten the PLATES (41G) to the TOP (E). Use four BLACK 9/16" LARGE HEAD SCREWS (1S)
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
41G
Pilot hole to be used only if you
purchased the optional 426468
Articulating Keyboard Shelf.
Page 22
1S
C
46E
B
Advertisement
