Download
Share
Print this page
Teknik 5427413 Instruction Booklet
  1. Manuals
  2. Brands
  3. Teknik Manuals
  4. Indoor Furnishing
  5. 5427413
  6. Instruction booklet

Teknik 5427413 Instruction Booklet

Desk return
Hide thumbs

Advertisement

Quick Links

Download this manual
Teknik
www.teknikoffice.co.uk
Desk Return
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS
IMPORTANT SAFETY
INFORMATION.
Hudson Elm finish | Model 5427413
PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
English pg 1-46
Français pg 47-53
Español pg 54-60
Lot # 566772
08/23/21
Purchased:
__________________

Advertisement

loading

Related Manuals for Teknik 5427413

Summary of Contents for Teknik 5427413

  • Page 1 Teknik www.teknikoffice.co.uk Desk Return NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Hudson Elm finish | Model 5427413 PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-46 Français pg 47-53 Español pg 54-60 Lot # 566772 08/23/21 Purchased: __________________...
  • Page 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide 8, 28 Assembly Steps 5-46 Hammer Not actual size Français 47-53 Español 54-60 Safety 61-62 Warranty Page 2...
  • Page 3 Now you know Part Identification our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. SMALL RIGHT END (1) SMALL LEFT END (1) LARGE END (1)
  • Page 4 Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 37F TWIST-LOCK LEVELER - 6 FASTENER - 8 ® PLATE - 2 WOOD DOWEL - 8 GROMMET - 1 GROMMET CAP- 1 LARGE HOLE CORD CLIP - 2 PLUG - 3 TWIST-LOCK®...
  • Page 5 Optional Accessories (sold separately) å This piece of furniture accommodates one or more of the following optional accessories (sold separately). Powered Grommet (Item 427829) å Articulating Keyboard Shelf (Item 426468) å The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top. LED Light (Item 426494) å...
  • Page 6 Step 1 å You have the option to assemble the Return to connect on the LEFT or RIGHT. If you want the Return to connect to the left side, go to Step 2. If you want the Return to connect to the right side, go to Step 22. CONNECTING RETURN TO LEFT SIDE STEP 2 CONNECTING RETURN TO RIGHT SIDE...
  • Page 7 Step 2 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Using your hammer, gently tap two LEVELERS (46E) completely into the holes in the LARGE END (C). å...
  • Page 8 Hardware Usage Guide HOW TO USE A TWIST-LOCK FASTENER ® 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. If the TWIST-LOCK® FASTENER NOTE: The dowel end of the FASTENER must is already inserted in the part, remain fully inserted in the hole of the adjoining be sure both the dowel end and part while locking the FASTENER.
  • Page 9 Step 4 å Push two SAUDER TWIST-LOCK® FASTENERS (37F) into the large holes in the SMALL RIGHT END (A). Just think. The sooner you do this, the sooner å Using your hammer, gently tap two LEVELERS (46E) you do something else. completely into the holes in the SMALL RIGHT END (A).
  • Page 10 Step 5 å Insert two WOOD DOWELS (42F) into the TOP (D). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Push two CORD CLIPS (9P) into the holes in the TOP (D). Pilot hole to be used only if you purchased the optional 426468 Articulating...
  • Page 11 Step 6 å CONNECTING RETURN You have the option to assemble the Return to connect to the following desks: 427468, 427422, and 427427. TO LEFT SIDE å If you are fastening the Return to the 427468 Desk, go to Step 7. å...
  • Page 12 Step 7 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427468 Left End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL RIGHT END (A), pull the FASTENERS back out of the holes.
  • Page 13 Step 8 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL RIGHT END (A). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL RIGHT END (A).
  • Page 14 Step 9 å Fasten the PLATES (41G) to the 427468 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 14...
  • Page 15 Step 10 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert leave without a bite.
  • Page 16 Step 11 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...
  • Page 17 Step 12 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427422 Left End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL RIGHT END (A), pull the FASTENERS back out of the holes.
  • Page 18 Step 13 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL RIGHT END (A). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL RIGHT END (A).
  • Page 19 Step 14 å Fasten the PLATES (41G) to the 427422 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 19...
  • Page 20 Step 15 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert into leave without a bite.
  • Page 21 Step 16 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...
  • Page 22 Step 17 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427427 Left End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL RIGHT END (A), pull the FASTENERS back out of the holes.
  • Page 23 Step 18 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL RIGHT END (A). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL RIGHT END (A).
  • Page 24 Step 19 å Fasten the PLATES (41G) to the 427427 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 24...
  • Page 25 Step 20 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert into leave without a bite.
  • Page 26 Step 21 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...
  • Page 27 Step 22 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Using your hammer, gently tap two LEVELERS (46E) completely into the holes in the LARGE END (C). å...
  • Page 28 Hardware Usage Guide HOW TO USE A TWIST-LOCK FASTENER ® 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. If the TWIST-LOCK® FASTENER NOTE: The dowel end of the FASTENER must is already inserted in the part, remain fully inserted in the hole of the adjoining be sure both the dowel end and part while locking the FASTENER.
  • Page 29 Step 24 å Push two SAUDER TWIST-LOCK® FASTENERS (37F) into the large holes in the SMALL LEFT END (B). Just think. The sooner you do this, the sooner å Using your hammer, gently tap two LEVELERS (46E) you do something else. completely into the holes in the SMALL LEFT END (B).
  • Page 30 Step 25 å Insert two WOOD DOWELS (42F) into the TOP (D). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Push two CORD CLIPS (9P) into the holes in the TOP (D). Pilot hole to be used only if you purchased the optional...
  • Page 31 Step 26 å CONNECTING RETURN You have the option to assemble the Return to connect to the following desks: 427468, 427422, and 427427. TO RIGHT SIDE å If you are fastening the Return to the 427468 Desk, go to Step 27. å...
  • Page 32 Step 27 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427468 Right End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL LEFT END (B), pull the FASTENERS back out of the holes.
  • Page 33 Step 28 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL LEFT END (B). å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL LEFT END (B).
  • Page 34 Step 29 å Fasten the PLATES (41G) to the 427468 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 34...
  • Page 35 Step 30 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert leave without a bite.
  • Page 36 Step 31 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...
  • Page 37 Step 32 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427422 Right End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL LEFT END (B), pull the FASTENERS back out of the holes.
  • Page 38 Step 33 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL LEFT END (B). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL LEFT END (B).
  • Page 39 Step 34 å Fasten the PLATES (41G) to the 427422 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 39...
  • Page 40 Step 35 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert into leave without a bite.
  • Page 41 Step 36 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...
  • Page 42 Step 37 å Insert the dowel end of two TWIST-LOCK® FASTENERS (37F) into the 427427 Right End as shown in the enlarged diagram. å NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the long edge of the SMALL LEFT END (B), pull the FASTENERS back out of the holes.
  • Page 43 Step 38 å NOTE: You will need someone's help in this step. å Insert two WOOD DOWELS (42F) into the SMALL LEFT END (B). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the MODESTY PANEL (E) to the SMALL LEFT END (B).
  • Page 44 Step 39 å Fasten the PLATES (41G) to the 427427 Desk Top. Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 44...
  • Page 45 Step 40 å Fasten the TOP (D) to the LARGE END (C) and MODESTY PANEL (E). Tighten five TWIST-LOCK® FASTENERS. If you're doing this to help a friend, don't å NOTE: Be sure the WOOD DOWELS in the TOP insert into leave without a bite.
  • Page 46 Step 41 å Insert the GROMMET (2P) and GROMMET CAP (3P) into the large hole in the TOP (D). å Insert the HOLE PLUGS (98P and 107P) into any unused holes. å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (105P) onto each visible TWIST-LOCK® FASTENER. å...