Advertisement
Quick Links
1800x750 Desk
Hudson Elm finish | Model 5427427
Teknik
www.teknikoffice.co.uk
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS
IMPORTANT SAFETY
INFORMATION.
PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
English pg 1-12
Français pg 13-14
Español pg 15-16
Lot # 566806
Purchased:
__________________
09/22/21
Advertisement
Related Manuals for Teknik 5427427
Summary of Contents for Teknik 5427427
- Page 1 Teknik www.teknikoffice.co.uk 1800x750 Desk NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Hudson Elm finish | Model 5427427 PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-12 Français pg 13-14 Español pg 15-16 Lot # 566806 09/22/21 Purchased: __________________...
- Page 2 Table of Contents Assembly Tools Required Hardware Identification No. 2 Phillips Screwdriver Part Identification Tip Shown Actual Size Optional Accessories Hardware Usage Guide Hammer Not actual size Assembly Steps 4-12 Français 13-14 Español 15-16 Safety 17-18 Warranty Hardware Identification å You may receive extra hardware with your unit.
- Page 3 Now you know Part Identification our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. RIGHT END (1) LEFT END (1) TOP (1)
- Page 4 Optional Accessories (sold separately) å This piece of furniture accommodates one or more of the following optional accessories (sold separately). Powered Grommet (Item 427829) å Articulating Keyboard Shelf (Item 426468) å The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top. LED Light (Item 426494) å...
- Page 5 Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Using your hammer, gently tap two LEVELERS (46E) completely into the holes in the LEFT END (B). å...
- Page 6 Step 2 å Insert two WOOD DOWELS (42F) into the exact holes shown in the LEFT END (B). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Fasten the LEFT END (B) to the MODESTY PANEL (D). Tighten three TWIST-LOCK®...
- Page 7 Step 3 å Using your hammer, gently tap the remaining LEVELERS (46E) completely into the holes in the RIGHT END (A). å NOTE: Adjustments to the LEVELERS will be made later in assembly once your unit is standing upright. Page 7...
- Page 8 Step 4 å Insert two WOOD DOWELS (42F) into the exact holes shown in the RIGHT END (A). å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. å Fasten the RIGHT END (A) to the MODESTY PANEL (D). Tighten three TWIST-LOCK®...
- Page 9 Step 5 å Insert seven WOOD DOWELS (42F) into the exact holes shown in the TOP (C). å NOTE: You may need to gently tap the WOOD DOWELS in with your hammer. å Push two CORD CLIPS (9P) into the TOP (C). Pilot hole to be used only if you purchased the optional...
- Page 10 Step 6 å Fasten the TOP (C) to the ENDS (A and B) and MODESTY PANEL (D). Tighten eleven TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the ENDS and MODESTY PANEL. Page 10...
- Page 11 Step 7 å The 427427 Desk may be placed in a variety of configurations with other units as shown in the diagrams below. 427427 427413 427411 427410 427427 427413 427410 427411 Page 11...
- Page 12 Step 8 å Your unit may need leveling. To raise a corner of your unit, rotate the LEVELER downward. To lower a corner of your unit, rotate the LEVELER upward. å For long-term care and maintenance of your unit, you may touch up the edges with the TOUCH-UP PEN (10M). å...