Endress+Hauser Cerabar PMP11 Operating Instructions Manual page 24

Operation options
24
Out of range setting
Message if signal is below 4 mA or above 20 mA:
• "HI" message = over range
• "LO" message = below range
Press the B key until "HILO" is displayed.
Press A+B for the setting function (message inactive):
Press B or A for up or down (message active):
Press A+B to quit the setting function and to go to the "HILO" menu item.
Please note: If the "HILO" message is not active, the error "Er06" is displayed if the display
range (-1999 to +9999) is exceeded.
Changing to the measuring mode
Depending on the menu item selected, press key A or B between 1 and 8 times.
Cerabar PMP11, PMP21, PMP23
H I L
o F
o
H I L
Endress+Hauser
O
F
n
O