Endress+Hauser Cerabar PMP11 Operating Instructions Manual page 31

Cerabar PMP11, PMP21, PMP23
Sensor Device
Devices for absolute pressure measurement
4)
400 mbar (6 psi) PMP21
PMP23
4)
1 bar (15 psi) PMP21
PMP23
4)
2 bar (30 psi) PMP21
PMP23
4)
4 bar (60 psi) PMP21
PMP23
4)
10 bar (150 psi) PMP21
PMP23
4)
40 bar (600 psi) PMP21
PMP23
4)
100 bar (1 500 psi) PMP21 0 (0)
4)
400 bar (6 000 psi) PMP21 0 (0)
1) Highest turn down that can be set at the factory: 5:1. The turn down is preset and cannot be changed.
2) Other measuring ranges (e.g. –1 to +5 bar (–15 to 75 psi)) can be ordered with customer-specific settings (see the Product Configurator, order
code for "Calibration; Unit" option "J"). It is possible to invert the output signal (LRV = 20 mA; URV = 4 mA). Prerequisite: URV < LRV
3) Product Configurator, order code for "Sensor range"
4) Vacuum resistance: 0.01 bar (0.145 psi)
Device Range 400 mbar (6 psi)
PMP11 0.5% TD 1:1
PMP21 0.3% TD 1:1
PMP23 0.3% TD 1:1
Endress+Hauser
Maximum sensor
measuring range
lower (LRL) upper (URL)
[bar (psi)] [bar (psi)]
0 (0) 0.4 (+6)
0 (0) 1 (+15)
0 (0) 2 (+30)
0 (0) 4 (+60)
0 (0) 10 (+150)
0 (0) +40 (+600)
+100 (+1500) 20 (300)
+400 (+6000) 80 (1200)
Maximum turn down which can be ordered for absolute pressure and gauge pressure
sensors
1 bar (15 psi)
TD 1:1 to TD 2.5:1
TD 1:1 to TD 2.5:1
TD 1:1 to TD 2.5:1
Lowest MWP OPL
calibratable
1)
span
[bar (psi)] [bar (psi)] [bar (psi)]
0.4 (0.6) 1 (15) 1.6 (24)
1 (15) 2.7 (40.5) 4 (60)
0.4 (0.6) 6.6 (99) 8 (120)
0.8 (1.2) 10.7 (160.5) 16 (240)
2 (30) 25 (375) 40 (600)
4 (60) 100 (1500) 160 (2400) 0 to 40 bar (0 to 600 psi)
100 (1500) 160 (2400) 0 to 100 bar (0 to 1 500 psi)
400 (6000) 600 (9000) 0 to 400 bar (0 to 6 000 psi)
2 bar (30 psi)
4 bar (60 psi)
10 bar (150 psi)
25 to 400 bar (375 to 6 000 psi)
TD 1:1 to TD 5:1
TD 1:1 to TD 5:1
TD 1:1 to TD 5:1
Technical data
2)
Factory settings
0 to 400 mbar (0 to 6 psi)
0 to 1 bar (0 to 15 psi)
0 to 2 bar (0 to 30 psi)
0 to 4 bar (0 to 60 psi)
0 to 10 bar (0 to 150 psi)
6 bar (90 psi)
16 bar (240 psi)
TD 2.5:1
TD 2.5:1
TD 2.5:1
3)
Option
2F
2H
2K
2M
2P
2S
2U
2W
31