8 469 PC SOFTWARE
8.3 USING 469PC
Setpoints must be saved to a file on the local PC before performing any firmware upgrades. Saving setpoints is
also highly recommended before making any setpoint changes or creating new setpoint files. To save setpoints
to a file on the local PC, follow the procedure below.
1. Select the File > Properties menu item. The dialog box below appears, allowing for the configuration of
the 469PC software for the correct firmware version. 469PC needs to know the correct version when creat-
ing a setpoint file so that setpoints not available in a particular version are not downloaded into the relay.
2. When the correct firmware version is chosen, select the File > Save As menu item. This launches the fol-
lowing dialog box. Enter the filename under which the setpoints are saved in the File Name box or select
any displayed file names to update them. All 469 setpoint files should have the extension 469 (for exam-
ple, motor1.469). Click OK to proceed.
3. The software reads all the relay setpoint values and stores them to the selected file.
GE Power Management
469 Motor Management Relay
8.3 USING 469PC
8.3.1 SAVING SETPOINTS TO A FILE
8
8-5