Parameter Options - Filter; Operation/Display 0 - Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual

VLT AQUA Low Harmonic Drive Operating In-
structions

6.5 Parameter Options - Filter

6.5.1 Operation/Display 0-**

Par. Parameter description
No. #
0-0* Basic Settings
0-01 Language
0-04 Operating State at Power-up (Hand)
0-1* Set-up Operations
0-10 Active Set-up
0-11 Edit Set-up
0-12 This Set-up Linked to
0-13 Readout: Linked Set-ups
0-14 Readout: Edit Set-ups / Channel
0-2* LCP Display
0-20 Display Line 1.1 Small
0-21 Display Line 1.2 Small
0-22 Display Line 1.3 Small
0-23 Display Line 2 Large
0-24 Display Line 3 Large
0-25 My Personal Menu
0-4* LCP Keypad
0-40 [Hand on] Key on LCP
0-41 [Off] Key on LCP
0-42 [Auto on] Key on LCP
0-43 [Reset] Key on LCP
0-5* Copy/Save
0-50 LCP Copy
0-51 Set-up Copy
0-6* Password
0-60 Main Menu Password
0-61 Access to Main Menu w/o Password
0-65 Quick Menu Password
0-66 Access to Quick Menu w/o Password
Default value
[0] English
[1] Forced stop
[1] Set-up 1
[1] Set-up 1
[0] Not linked
0 N/A
0 N/A
30112
30110
30120
30100
30121
ExpressionLimit
[1] Enabled
[1] Enabled
[1] Enabled
[1] Enabled
[0] No copy
[0] No copy
100 N/A
[0] Full access
200 N/A
[0] Full access
®
MG.20.T1.02 - VLT is a registered Danfoss trademark
6 How to Programme the Low Harmonic Drive
4-set-up FC 302 Change dur-
only ing opera-
tion
1 set-up TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
Conver- Type
sion index
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Uint16
0 Int32
- Uint16
- Uint16
- Uint16
6
- Uint16
- Uint16
0 Uint16
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Int16
- Uint8
0 Int16
- Uint8
145