Table of Contents
Advertisement
7. User's Maintenance
•
Unscrew the side knobs [1].
•
Slightly rotate the panel [2], lift it up to remove it
from the slots in the upper parts of the frame. Re-
move the panel.
•
Use a vacuum cleaner and a hard bristles brush to
clean the dust and any other dirt residue between
the aluminium fins of the condenser [3].
•
Follow the operations in the reverse order to reas-
semble the components.
7.7 Cleaning of condenser with the removable filter
The aluminium fins of the condenser can cause
injuries to hands and arms, use protective gloves for
cleaning these parts.
For the filter removal, perform the following steps:
•
Open the panel [1] by inserting the supplied tool [2]
into the hole on the upper front side of the panel.
•
Remove the filter [3] from the guides on the panel
[1].
•
Use a vacuum cleaner to remove dust or any other
dirt in the filter [3].
•
Wash the filter [3] with running water and dry with
soft cloth.
•
Remove dust between the condenser fins [4], giv-
en in the previous section.
•
Follow the operations in the reverse order to reas-
semble the parts.
•
Close the panel which is locked by magnets.
Cod. 80006380a - GB
1
__________________
24
2
1
3
2
2
1
3
4
3
01.02.2021
Advertisement
Table of Contents
