Service/Self Service Conversion - Viessmann GALILEI Tecto CI2 User Manual

6. Loading and using the unit
6.6 Positioning of intermediate shelves
It is possible to tilt and/or lift the intermediate shelves by using the different shelf holder positioned on the side-
walls.
To change the layout of the glass shelves proceed as follows:
•
Unscrew the fixing screw of the shelf holders [5]. Extract the glass shelf [6] removing it from both sides (Fig. 1)
•
Remove the shelf holder [6] from the sidewall. (Fig. 1)
•
To tilt the glass shelf (Fig. 2) insert the shelf holder in the sidewall holes as given in the following table:
Combination A-1
Angle 0°
•
To lift up the glass shelf (Fig. 3) insert the shelf holder in the sidewall holes as given in the following table:
Combination A-1
Angle 1
•
Reposition the glass shelf by sliding it inside the shelves holder, then tighten the shelf holder screw.
Fig.1
Cod. 80006370a - GB
A-2 A-3
7° 14°
B-2 C-3
2 3
4
6
3
2
1
5
_____________________________
A-4 B-2 B-3
21° 0° 7°
C
B
A
Fig.2
20
B-4 C-3
14° 0°
4
C
3
B
2
A
1
Fig.3
C-4
7°
01.02.2021