Cleaning The Front Glass; Cleaning The Acrylic Glass Parts - Viessmann GALILEI Tecto CI2 User Manual

7. User's Maintenance
7.3 Cleaning glass shelves and front glass ____________________________
Use a soft and non-abrasive cloth with neutral de-
tergents (pH 6÷8) for cleaning and a soft and dry cloth for
drying. Do not use abrasive products or metal scrapers
that may scratch the glass. Do not use acid-based prod-
ucts or ammonia-based products, bleach or alcohol.
Do not use corrosive detergents, thinners, alcohol or sol-
vent which can damage the plastic seals and the painted
parts of the frame.
Do not use hot water on cold glass as it can break
and be dangerous for the operator.
To remove the glasses, proceed as follows:
•
To extract the front glass [1]. Unscrew the glass
stopper screw [2], if any. Extract the glass from the
profile slot and lift it up from both sides.
•
To extract the glass shelves [3]. Remove the glass
holder screw [4]. Extract the glass shelves remov-
ing them from both sides.
•
Reposition the pieces by following the reverse or-
der.
7.4 Cleaning of the acrylic glass parts
Use soft microfiber or cotton cloth soaked with
lukewarm water (max. 35° C). If there are halos, add
some neutral diluted detergent (pH 6÷8). Rinse and dry
with a soft and dry cloth. Do not use corrosive deter-
gents, thinners, alcohol or solvents.
For cleaning completely the acrylic glass parts:
•
Extract the front glass following the instructions in
section 7.3.
•
Extract the air intake air baffle [1].
Cod. 80006380a - GB
____________________________
2
22
1
2
4
3
3
1
01.02.2021