Table of Contents
Advertisement
7. User's Maintenance
•
To extract the back drilled side panel [4] first re-
move the glass shelves as given in the section 7.3.
Then lift and pull outwards the back side panel
from both sides.
•
Clean the removed components, sidewalls [2] and
the top canopy [3].
•
Follow the operations in the reverse order to reas-
semble the components.
7.5 Cleaning of the internal bottom surface of the casing
Use soft microfiber or cotton cloth soaked with
lukewarm water (max. 35° C). If there are halos, add
some neutral diluted detergent (pH 6÷8). Rinse and dry
with a soft and dry cloth. Use a specific product for the
stainless steel display deck. Do not use corrosive deter-
gents, thinners, alcohol or solvents.
Do not use hoses connected to the water system
to wash the unit. Do not use direct or indirect water jets
or machines for pressure cleaning (i.e. high pressure
washers).
•
Remove display decks [1] by using the supplied
tool [2].
•
Vacuum any residue in the carcass.
•
Clean the air grills [3], the evaporator cover [4], the
fan holders [5] and the insulated casing [6], paying
attention to not wet the electrical parts.
•
Follow the operations in the reverse order to reas-
semble the components.
7.6 Cleaning of the condenser
Use a brush with hard bristles and a vacuum
cleaner.
The aluminium fins of the condenser can cause
injuries to the hands and arms; use protective gloves for
cleaning these parts.
Cod. 80006380a - GB
4
5
__________________________________
23
4
_______________
2
1
3
2
1
6
01.02.2021
Advertisement
Table of Contents
