ISL94212EVKIT1Z
Command Tab
The command tab allows individual commands to be sent to any
device in the stack (or all devices, if device 15 is chosen.) This tab
includes a raw message sender and CRC4 calculator. By entering
in the device address, data type, data address and data, the GUI
calculates the CRC4 value and shows the resulting encoded
UG048 Rev 0.00
August 26, 2015
command. This command can then be sent to the chosen device.
The image in
NOTE: This screen shows a selection for ISL78600 and
ISL78601. This is an error in the 0.6.2 release of the software.
For the ISL94212, use the selection for the ISL78600. The
selection for ISL78601 has no function.
FIGURE 10. COMMANDS
Figure 10
shows the command for SLEEP.
Page 12 of 24