ISL91127IRN-EVZ, ISL91127IRA-EVZ
Evaluation Board User Guide
Description
The
ISL91127IR
is a high-current buck-boost switching regulator
for systems using new battery chemistries. It uses Intersil's
proprietary buck-boost algorithm to maintain voltage regulation,
while providing excellent efficiency and very low output voltage
ripple when the input voltage is close to the output voltage. The
ISL91127IRN-EVZ and ISL91127IRA-EVZ platforms allow quick
evaluation of the high performance features of the ISL91127IR
buck-boost regulator series.
Specifications
The boards are designed to operate at the following operating
conditions:
• Input voltage rating from 1.8V to 5.5V
• Resistor programmable output voltage on the
ISL91127IRA-EVZ
• Fixed 3.3V output voltage on the ISL91127IRN-EVZ
• Up to 2A output current (PVIN = 2.5V, V
• 2.5MHz switching frequency
• Operating temperature range: -40°C to +85°C
VIN
GND
UG080 Rev 2.00
October 28, 2016
= 3.3V)
OUT
ISL91127IRAZ
PVIN
LX1
VIN
LX2
VOUT
MODE
FB
EN
SGND PGND
FIGURE 1. ISL91127IRA-EVZ BLOCK DIAGRAM
USER'S MANUAL
Key Board Features
• Small, compact design
• Jumper selectable EN (enabled/disabled)
• Jumper selectable MODE (auto-PFM/forced-PWM)
• Connectors, test points and jumpers for easy probing
References
•
ISL91127IR
datasheet
Ordering Information
PART NUMBER
ISL91127IRN-EVZ
Evaluation Board for ISL91127IRNZ
ISL91127IRA-EVZ
Evaluation Board for ISL91127IRAZ
UG080
Rev 2.00
October 28, 2016
DESCRIPTION
VOUT
GND
Page 1 of 7
Need help?
Do you have a question about the ISL91127IRN-EVZ and is the answer not in the manual?
Questions and answers