1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. 6.4 Mega Deck Fort
  6. Install manual

Tree Frogs 6.4 Mega Deck Fort Install Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tape Measure
Phillips Screw Driver
Claw Hammeror Rubber Mallet
9/16" Deep Well Socket
Phillips Head Screw Bits
Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before
getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swing set recommended.
Houston, tX 77041 • www.treefrogsswingsets.com • © 2013 kiD structures inc.
6.4 Mega Deck Fort
Install Manual
Tools Needed for Assembly
24" Level
3/8" Cordless Drill or Electric Drill
Pliers or Vise Grips
3/4" Deep Well Socket
An Adult with two Adult Helpers
Version 6.14
Angle Square
3/8" Drive Ratchet or Electric Impact Gun
7/16" Deep Well Socket
1/8", 1/4", and 9/16" Drill Bits

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6.4 Mega Deck Fort and is the answer not in the manual?

Questions and answers

Related Manuals for Tree Frogs 6.4 Mega Deck Fort

Summary of Contents for Tree Frogs 6.4 Mega Deck Fort

  • Page 1 6.4 Mega Deck Fort Install Manual Version 6.14 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...
  • Page 2 ● Be sure that the sealant you select is non-toxic and child safe. Your local tree frogs wooden swing set factory dealer may offer a complete power wash and reseal and maintenance program.

  • Page 3: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 4 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 5 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS the u.s. consumer Product safety commission (cPsc) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.

  • Page 6: Universal Deck

    Megadeck Fort Universal Bundle 1 Item No. Part Number Part Description QTY. mB1-1 17-4-00157 UNIVERSAL FORT MAINBEAM mB1-2 16-4-00285 UNIVERSAL FORT TOP JOIST SB mB1-3 16-4-00216 (L) gusset BrAcket mB1-4 16-4-00217 (r) gusset BrAcket mB1-5 16-4-00214 UNI. PC CORNER POST/ UNI. FORT UPRIGHT mB1-6 16-4-00290 UNI.
  • Page 7 64-7-00241 megADeck (r) AngLeD wr PAneL wr-10 64-7-00242 megADeck (L) AngLeD wr PAneL Mega Deck Fort Standard Box mst-1 59-1-00013 TREE FROGS PLAQUE mst-2 57-2-00004 1 1/4” PLAYGRIP SAFETY HANDLE mst-3 57-2-00005 1 1/4” PLAYGRIP LADDER HANDLE mst-4 56-1-00012...

  • Page 8: Part Description

    6.4 Mega Deck Fort Box A. (Multi- Color) Item No. Part Number Part Description QTY. BXA-1 37-1-00018 19” sHiP’s wHeeL-YeLLow BXA-2 37-1-00021 TELESCOPE BXA-3 60-1-00006 20” trAPeze BAr w/ 43” cHAin- YeLLow 6.4 Fort Box Rockwall (Multi- Color) rwB-1 36-1-00023...
  • Page 9 Mega Deck Fort Hardware Bag mfH-1 40-1-00001 3/8” ACORN NUT mfH-2 40-1-00002 1/2” ACORN NUT mfH-3 40-1-00013 1/2” x 7” CARRIAGE BOLT mfH-4 40-1-00020 1 5/8” coAteD Deck screw mfH-5 40-1-00022 2 1/2” coAteD Deck screw mfH-6 40-1-00026 3/8” HEx NUT mfH-7 40-1-00028 1/2”...
  • Page 10 6.4 Fort Rockwall Hardware Bag Item No. Part Number Part Description QTY. rwH-1 40-1-00067 1/4” x 1 1/2” PAN PHILLIPS M/S rwH-2 40-1-00077 1/4” X 7/16” 4 Prong t-nut rwH-3 40-1-00081 1/4” USS FLATWASHER rwH-4 40-1-00061 3/8” X 5” HeX LAg screw rwH-5 40-1-00082 3/8”...
  • Page 11 Megadeck Fort Bundle 1 of 2 MB1-1 MB1-2 MB1-3 MB1-4 17-4-00157 16-4-00285 16-4-00216 16-4-00217 Universal Fort Mainbeam Uni. Fort Top Joist SB (L) Gusset Bracket (R) Gusset Bracket QTY. 4 QTY. 1 QTY. 3 QTY. 3 MB1-5 MB1-6 MB1-7 16-4-00214 16-4-00290 16-4-00283 Universal Fort Upright...
  • Page 12 Megadeck Fort Bundle 2 of 2 Cont. MB2-5 MB2-4 MB2-6 13-4-00086 12-4-00140 12-4-00141 Fort Playhouse Panel Facia Universal Filler Universal Rail Bottom QTY. 1 QTY. 3 QTY. 2 6.4 Megadeck Fort Bundle B. MBA-1 MBA-2 16-4-00292 16-4-00314 128” Fort Corner Post 128”...
  • Page 13 6.4 Megadeck Fort Bundle B. Cont. MBA-6 MBA-7 MBA-8 MBA-9 13-4-00082 16-4-00296 16-4-00297 13-4-00079 151” Fort Upper Wing 100” Fort (L) Ladder Leg 100” Fort (R) Ladder Leg Universal Fort Ladder Step QTY. 1 QTY. 1 QTY. 1 QTY. 7 Universal Deck UD-1 UD-2...
  • Page 14 Universal Rail Bundle RAIL-1 RAIL-2 RAIL-1 12-4-00140 12-4-00141 15-4-00008 Universal Rail Top Universal Rail Bottom Universal Rail Picket QTY. 1 QTY. 1 QTY. 5 6.4 Fort Rockwall RW-1 RW-2 RW-3 16-4-00306 16-4-00305 11-4-00138 96 1/2” Fort (R) RW Ladder Leg 96 1/2”...
  • Page 15 6.4 Fort Rockwall Cont. RW-7 RW-8 16-4-00216 16-4-00218 Universal Rope Block Uni. Entrapment Block QTY. 1 QTY. 2 Megadeck Fort Wood Roof Bundle WR-1 WR-2 WR-3 13-4-00078 64-7-00208 64-7-00209 Universal Wood Roof Support Fort Wood Roof Fan Fort Wood Roof Panel QTY.
  • Page 16 Megadeck Fort Wood Roof Bundle Cont. WR-7 WR-8 WR-9 64-7-00238 64-7-00240 64-7-00241 MD (L) Bottom Dormer WR Panel MD (R) Bottom Dormer WR Panel MD (R) Angled WR Panel QTY. 1 QTY. 1 QTY. 1 WR-10 64-7-00242 MD (L) Angled WR Panel QTY.
  • Page 17 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-1 Mfh-2 Mfh-4 Mfh-5 40-1-00001 40-1-00002 40-1-00020 40-1-00022 3/8” acorn nut 1/2” acorn nut 1 5/8” Coated deck screw 2 1/2”...
  • Page 18 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-9 Mfh-10 40-1-00054 40-1-00055 1/4” x 2” hex lag screw 1/4” x 3” hex lag screw QtY. 14 QtY.
  • Page 19 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-20 Mfh-21 Mfh-22 Mfh-23 40-1-00082 40-1-00083 40-1-00084 40-1-00105 3/8” uss flatwasher 1/2” uss flatwasher 3/4” uss flatwasher 5/16”...
  • Page 20 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-25 40-1-00115 3/8” x 5 1/2” Carriage bolt QtY. 6 Megadeck 6.4 hardware bag Mfh-26 41-1-00025 6Mh-1 6Mh-2 3/8”...
  • Page 21 megadeck 6.4 hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) 6Mh-5 40-1-00061 3/8” x 5” hex lag screw QtY. 2 6Mh-6 6Mh-7 6Mh-8 6Mh-9 40-1-00074 40-1-00081 40-1-00082 40-1-00083 1/2”...
  • Page 22 megadeck 6.4 hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) 6Mh-11 40-1-00101 1/2” x 8 1/2” Carriage bolt QtY. 3 6Mh-12 40-1-00114 1/2” x 5” Carriage bolt QtY.
  • Page 23 6.4 fort rockwaLL hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) rWh-1 rWh-2 rWh-3 rWh-5 40-1-00067 40-1-00077 40-1-00081 40-1-00082 1/4” x 1 1/2” Pan Phillips M/s 1/4” x 7/16” 4 Prong t-nut 1/4”...
  • Page 24 Megadeck Fort- Standard Box MST-1 MST-3 MST-4 MST-2 59-1-00013 57-2-00005 56-1-00012 57-2-00004 Tree Frogs Plaque 1 1/4” Playgrip Ladder Handle Ductile Iron Swing Hanger 1 1/4” Playgrip Safety Handle QTY. 1 QTY. 2 QTY. 2 QTY. 5 MST-5 MST-6 59-1-00011 58-1-00013 6.4 Megadeck Fort Box A.
  • Page 25 5.4 Fort Rockwall Box (Multi- Color and Green) RWB-1 RWG-1 RWB-2 & RWG-2 36-1-00023 36-1-00024 65-7-00017 Large Rock- (Multi Color) Large Rock- Green 16’ Yellow Rope QTY. 16 QTY. 16 QTY. 1...

  • Page 26: Ladder Assembly

    LADDER ASSEMBLY ROCKWALL BOARD PARTS NEEDED HARDWARE NEEDED MBA-7- 100” Fort (L) Ladder Leg- 6MH-3- 1/4” x 4 1/2” Hex Lag Screw- (28) MBA-8- 100” Fort (R) Ladder Leg- 6MH-7- 1/4” USS Flatwasher- (28) MBA-9- Universal Fort Ladder Step- RWH-1- 1/4” x 1 1/4” Pan Phillips M/S- (36) RW-5- Uni.
  • Page 27 ROCKWALL ASSEMBLY MEGADECK DECKS PARTS NEEDED HARDWARE NEEDED RW-1- 96.5” Fort (R) RW Ladder Leg- RW-2- 96.5” Fort (L) RW Ladder Leg- RWH-6- 2 1/2” Coated Deck Screw- (60) RW-3- Uni. Fort RW Board w/ Rope Hole- (1) RW-4- Uni. Fort RW Board Blank- MDD-4- 2 1/2”...

  • Page 28: Rail Assembly

    UNIVERSAL DECKS RAIL ASSEMBLY PARTS NEEDED HARDWARE NEEDED UD-1- Small Deck Board- UD-2- Large Deck Board- UD-5- 2 1/2” Coated Deck Screw- (42) UD-3- Deck Runners- UD-4- Deck Support- RAIL-4- 2 1/2” Coated Deck Screw- (20) (per rail) RAIL-1- Universal Rail Top- RAIL-2- Universal Rail Bottom- RAIL-3- Universal Rail Picket- REPEAT THIS STEP FOR 2 UNIVERSAL DECKS...
  • Page 29 (L) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MBA-1- 128” Fort Corner Post- MBA-2- 128” Megadeck Corner Post- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (24) MB2-2 Uni. 8 Hole Facia- MB2-3 14 Hole Megadeck Facia- MFH-20- 3/8” USS Flatwasher- (24) 54"...
  • Page 30 (L) SIDE MEGADECK WALL (R) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MFH-18- 5/16 x 3/8” 4 Prong T-Nut- MFH-23- 5/16” x 1” Hex Bolt- MFH-20- 3/8” USS Flatwasher- 25 1/4" GAP 54" GAP...
  • Page 31 (R) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MBA-1- 128” Fort Corner Post- MBA-2- 128” Megadeck Corner Post- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (24) MB2-2 Uni. 8 Hole Facia- MB2-3 14 Hole Megadeck Facia- MFH-20- 3/8” USS Flatwasher- (30) MFH-18- 5/16”...

  • Page 32: Main Assembly

    MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB2-1- Uni. Fort 4 Hole Facia- MFH-20- 3/8” USS Flatwasher- (16) MBA-5- 156 1/4” Fort Lower Wing- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (16) MBA-6- 151” Fort Upper Wing-...
  • Page 33 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-1- Universal Fort Main Beam- MFH-2- 1/2” Acorn Nut- MFH-3- 1/2” x 7” Carriage Bolt- MB1-3- (L) Gusset Bracket- MFH-22- 3/4” USS Flatwasher- MFH-21- 1/2” USS Flatwasher- MB1-4- (R) Gusset Bracket- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2”...
  • Page 34 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-1- Universal Main Beam- MFH-2- 1/2” Hex Nut- MFH-7- 1/2” Hex Nut- MFH-17- 1/2” Split Lockwasher- MFH-21- 1/2” USS Flatwasher- MFH-24- 1/2” x 9” Hex Bolt- 6MH-11- 1/2” x 8 1/2” Carriage Bolt- 6MH-10- 3/4” USS Flatwasher- 6MH-9- 1/2”...
  • Page 35 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-3- (L) Gusset Bracket- MFH-20 3/8” USS Flatwasher- MFH-12- 3/8” x 3 1/2” Hex Lag Bolt- MB1-4- (R) Gusset Bracket- TAKE OFF THE CARRIAGE BOLT, WASHERS, AND NUTS. MAIN BEAM WILL BE HELD BY GUSSETS TEMPORARILY...
  • Page 36 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Universal Deck- MFH-19- 1/4” x 4 1/2” Hex Lag Screw- (16) MFH-11- 1/4” USS Flatwasher- (16) BOTTOM VIEW...
  • Page 37 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB2-6- Universal Rail Bottom- MFH-10- 1/4” x 3” Hex Lag Screw- MFH-19- 1/4” USS Flatwasher- MBA-3- 76” Fort Wing Mainbeam- 6MH-11- 1/2” x 8 1/2” Carriage Bolt- MFH-21- 1/2” USS Flatwasher- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2”...
  • Page 38 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Universal Deck- MFH-19- 1/4” x 4 1/2” Hex Lag Screw- MB2-4- Universal Filler- MFH-11- 1/4” USS Flatwasher-...
  • Page 39 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MBA-4- 85 1/2” Fort Wing Suppport- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- MFH-20- 3/8” USS Flatwasher- 6MH-12- 1/2” x 5” Carriage Bolt- 6MH-10- 3/4” USS Flatwasher- 6MH-6- 1/2” Split Lockwasher- 6MH-2- 1/2” Hex Nut- 6MH-1- 1/2”...
  • Page 40 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-5- Universal Fort Upright- MFH-2- 1/2” Acorn Nut- MFH-7- 1/2” Hex Nut- MFH-17- 1/2” Split Lockwasher- MFH-21- 1/2” USS Flatwasher- MFH-22- 3/4” USS Flatwasher- MFH-3- 1/2” x 7” Carriage Bolt- MFH-24- 1/2” x 9” Hex Bolt-...
  • Page 41 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Megadeck Deck with Attached Uni. Fillers- 6MH- 11- 1/2” x 8 1/2” Carriage Bolt- MFH-22- 3/4” USS Flatwasher- MB1-5- Universal Fort Upright- MFH-21- 1/2” USS Flatwasher- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2” Hex Nut- MFH-2- 1/2”...
  • Page 42 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-6- Uni. Fort WR Center Post- 6MH-8- 3/8” USS Flatwasher- MFH-20- 3/8” USS Flatwasher- Ladder Assembly- 6MH-5- 3/8” x 5” Hex Lag Screw- MST-6- Fort Ladder Bracket- 6MH-4- 3/8” x 3 1/2” Hex Lag Screw- MFH-12- 3/8”...
  • Page 43 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Rockwall Assembly- RWH-4- 3/8” x5” Hex Lag Screw- MB2-5- Fort Playhouse Panel Facia- RWH-5- 3/8” USS Flatwasher- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- MFH-20- 3/8” USS Flatwasher-...
  • Page 44 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-6- Uni. Fort WR Center Post- 6MH-8- 3/8” USS Flatwasher- MFH-20- 3/8” USS Flatwasher- Ladder Assembly- 6MH-5- 3/8” x 5” Hex Lag Screw- MST-6- Fort Ladder Bracket- 6MH-4- 3/8” x 3 1/2” Hex Lag Screw- MFH-12- 3/8”...
  • Page 45 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED RW-7- Universal Rope Block- MFH-8- 3/8” x 5” Hex Bolt- MFH-26- 3/8” Bolt Cup- MFH-20- 3/8” USS Flatwasher- MFH-16- 3/8” Split Lockwasher- MFH-13- 3/8” Nylon Insert Hex Nut- MFH-1- 3/8” Acorn Nut- MST-4- Ductile Iron Hanger- RWH-4- 3/8”...
  • Page 46 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-1- Universal Wood Roof Support- MFH-1- 3/8” Acron Nut- MFH-6- 3/8” Hex Nut- WR-3- Fort Wood Roof Panel- MFH-16- 3/8” Split Lockwasher- MFH-20- 3/8” USS Flatwasher- MFH-21- 1/2” USS Flatwasher- MFH-25- 3/8” x 5 1/2” Carriage Bolt- MFH-19- 1/4”...

  • Page 47: Back Side View

    MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-3- Fort Wood Roof Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- BACK SIDE VIEW (REPEAT FOR BOTH SIDES)
  • Page 48 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-9- Megadeck (R) Angled WR Panel- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-3- Fort Wood Roof Panel-...
  • Page 49 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-3- Fort Wood Roof Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- (14)
  • Page 50 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-1- Universal Fort WR Support- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-5- MD (L) Top Dormer Panel- MFH-25- 3/8” x 5 1/2” Carriage Bolt- MFH-21- 1/2” USS Flatwasher- MFH-20- 3/8”...
  • Page 51 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-6- Megadeck (R) Top WR Dormer Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- (14)
  • Page 52 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-7- MD (L) Bottom Dormer Panel- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-5- MD (R) Bottom Dormer Panel-...
  • Page 53 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-2- Megadeck Fort Wood Roof Fan- MFH-5- 2 1/2” Coated Deck Screw- (24) WOOD SCREWS GO THROUGH THE WOOD ROOF BOARDS INTO THE SUPPORTS OF THE OVERLAPPING PANELS...

  • Page 54: Ship's Wheel

    TELESCOPE INSTALL SHIP’S WHEEL PARTS NEEDED HARDWARE NEEDED Ship’s Wheel- BXA-2 or BXB-2- Telescope-...
  • Page 55 SLIDE INSTALL TRAPEZE BAR PARTS NEEDED HARDWARE NEEDED Slide- MFH-15- #14 x 2” Pan Phillips T/S- Trapeze Bar- MFH-19- 1/4” USS Flatwasher- MST-5- Spring Clip 10x100mm INSTALL SLIDE IN THE OPENING NEXT TO THE TRAPEZE BAR...

  • Page 56: Rockwall Rope

    ROCKWALL ROPE SAFETY HANDLES 1 PARTS NEEDED HARDWARE NEEDED MST-2- 11” Safety Handle- MFH-19- 1/4” USS Flatwasher- MFH-15- #14 x 2” Pan Phillips T/S- RWB-2 or RWG-2- 16’ Yellow Rope- String the rope through Universal Rope Block on the Fort tie a knot securing it in the rope block.
  • Page 57 LADDER HANDLES SAFETY HANDLES 2 PARTS NEEDED HARDWARE NEEDED MST-3- 1 1/4” Playgrips Ladder Handles- MFH-19- 1/4” USS Flatwasher- MFH-15- #14 x 2” Pan Phillips T/S- MST-2- 11” Safety Handle-...
  • Page 58 5.4 & 6.4 Swing Beams Item No. Part Number Part Description QTY. sB-1 17-4-00108 2 POSITION SB 4” x 6”x 99 11/16” sB-2 17-4-00110 3 POSITION SWING BEAM 4” x 6” x 120” sB-3 17-4-00111 4 POSTION SWING BEAM 4” x 6” x 144” 5.4 A-Frame Legs 5Af-1 16-4-00256...
  • Page 59 Universal SB Hardware Bag Item No. Part Number Part Description QTY. usB-3 40-1-00084 3/4” uss fLAtwAsHer usB-4 40-1-00083 1/2” uss fLAtwAsHer usB-5 40-1-00082 3/8” uss fLAtwAsHer usB-6 40-1-00074 1/2” sPLit LockwAsHer usB-7 40-1-00073 3/8” sPLit LockwAsHer usB-8 40-1-00028 1/2” HEx NUT usB-9 40-1-00026 3/8”...
  • Page 60 Universal Swing Beam Box Accessories USB-2 USB-1 58-1-00009 58-1-00014 SB 45 Degree Bracket Swing Beam T-Bracket QTY. 1 QTY. 2 Ductile Hangers W/ Clips for 4x6 (Count is for Each Position) DH-1 DH-2 56-1-00012 59-1-00011 Ductile Iron Swing Hanger 10mm x 100mm Spring Clips QTY.
  • Page 61 5.4 & 6.4 Swing Beams #SB-1 #SB-2 #SB-3 17-4-00108 17-4-00110 17-4-00111 2 Pos Swing Beam 99 11/16” 3 Pos Swing Beam 120” 4 Pos Swing Beam 165 7/16” QTY. 1 QTY. 1 QTY. 1 5.4 A-Frame Legs 5AF-1 5AF-2 16-4-00256 16-4-00257 72”...
  • Page 62 6.4 A-Frame Legs 6AF-1 6AF-2 17-4-00153 17-4-00155 144” 4x6 (6.4) A Frame Leg 96” 4x6 (6.4) Crossmember QTY. 2 QTY. 1 6AF-3 6AF-4 6AF-5 16-4-00254 16-4-00253 16-4-00255 4x4 Swing Beam Block W/ Sinks 4x4 Swing Beam Block W/ Holes 4x4 Swing Beam Center Block QTY.
  • Page 63 Universal sB Hardware Bag insTaller nOTe: (YOU MUsT asseMBle THis PrOdUCT in aCCOrdanCe wiTH THese asseMBlY insTrUCTiOns. wHen COMPleTe give ManUal TO Owner.) #usb-5 #usb-3 #usb-4 #usb-6 #usb-7 40-1-00084 40-1-00083 40-1-00082 40-1-00074 40-1-00073 3/8” uss flatwasher 3/4” uss flatwasher 1/2” uss flatwasher 1/2”...
  • Page 64 Universal sB Hardware Bag insTaller nOTe: (YOU MUsT asseMBle THis PrOdUCT in aCCOrdanCe wiTH THese asseMBlY insTrUCTiOns. wHen COMPleTe give ManUal TO Owner.) #usb-13 40-1-00014 1/2” x 9” Carriage bolt QtY. 1 #usb-14 40-1-00013 1/2” x 7” Carriage bolt QtY. 5 #usb-15 40-1-00011 1/2”...
  • Page 65 Universal sB Hardware Bag insTaller nOTe: (YOU MUsT asseMBle THis PrOdUCT in aCCOrdanCe wiTH THese asseMBlY insTrUCTiOns. wHen COMPleTe give ManUal TO Owner.) #usb-17 40-1-00112 3/8” x 10” hex bolt QtY. 1 #usb-18 40-1-00061 3/8” x 5” lag bolt QtY. 2 ductile hangers for 4x6 sb hardware (Count for each Position) #dh-4...
  • Page 66 ductile hangers for 4x6 sb hardware (Count for each Position) #dh-7 40-1-00045 3/8” x 7” hex bolt QtY. 4 #dh-8 40-1-00001 3/8” acorn nut QtY. 4 USE THE RULER TO MEASURE YOUR BOLTS AND SCREWS. HARDWARE VIEWS SHOWN ABOVE ARE 1:1 SCALE AND CAN BE USED TO MATCH HARDWARE SIZES.
  • Page 67 SWING BEAM INStAll pArtS NEEdEd HArdWArE NEEdEd USB-3- 3/4” USS Flatwasher- USB-4- 1/2” USS Flatwasher- SB-1,2, or 3- Swing Beam- USB-6- 1/2” Split Lockwasher- USB-8- 1/2” Hex Nut- Swing Beam Top Joist (Attached to Unit) USB-10- 1/2” Acorn Nut- DH-1- Ductile Swing Hangers- DH-3- 3/8”...
  • Page 68 SWING BEAM INStAll pArtS NEEdEd HArdWArE NEEdEd 5or 6 AF-3- Swing Beam Block w/ Sinks- (1) USB-4- 1/2” USS Flatwasher- USB-5- 3/8” USS Flatwasher- USB-6- 1/2” Split Lockwasher- USB-7-3/8” Split Lockwasher- 5 or 6 AF-4-Swing Beam Block w/ Holes- USB-8- 1/2” Hex Nut- USB-9- 3/8”...
  • Page 69 SWING BEAM INStAll pArtS NEEdEd HArdWArE NEEdEd SB-1,2, or 3- Swing Beam- USB-4- 1/2” USS Flatwasher- USB-5- 3/8” USS Flatwasher- USB-6- 1/2” Split Lockwasher- USB-7-3/8” Split Lockwasher- USB-8- 1/2” Hex Nut- USB-9- 3/8” Hex Nut- USB-10- 1/2” Acorn Nut Plated- USB-11- 3/8”...
  • Page 70 SWING BEAM INStAll HArdWArE NEEdEd USB-4- 1/2” USS Flatwasher- USB-6- 1/2” Split Lockwasher- USB-8- 1/2” Hex Nut- USB-10- 1/2” Acorn Nut Plated- USB-14- 1/2” x 7” Carriage Bolt- (2) USB-3- 3/4” USS FLatwasher- USB-13-1/2” x 9” Carriage Bolt- USB-13 USB-14 USB-3 USB-4 USB-6...
  • Page 71 SWING BEAM INStAll pArtS NEEdEd HArdWArE NEEdEd 5 or 6 AF-2- Crossmember- USB-4- 1/2” USS Flatwasher- USB-6- 1/2” Split Lockwasher- USB-8- 1/2” Hex Nut- USB-10- 1/2” Acorn Nut Plated- USB-14- 1/2” x 7” Carriage Bolt- (2) USB-3- 3/4” USS FLatwasher- USB-10 USB-6 Above - Place the top corner of the A-FRAME CROSS-...
  • Page 72 SWING BEAM INStAll HArdWArE NEEdEd USB-18- 3/8” x 5” Lag Bolt- USB-5- 3/8” USS Flatwasher- DH-2- 10mm x 100mm Spring Clip- DH-2 USB-18 USB-5...
  • Page 73 SWING BEAM INStAll Above- Thread the rope through the Disc Swing and tie a good knot bigger the the hole. Now tie a knot every 2 ft until the desired height is accomplished. String the rope through the Swing Beam Rope Hole and tie another knot bigger then the hole.

Table of Contents