Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. RAINFOREST COTTAGE W/TREEHOUSE PANELS
  6. Assembly instructions manual

Tree Frogs RAINFOREST COTTAGE W/TREEHOUSE PANELS Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the RAINFOREST COTTAGE W/TREEHOUSE PANELS and is the answer not in the manual?

Questions and answers

Related Manuals for Tree Frogs RAINFOREST COTTAGE W/TREEHOUSE PANELS

Summary of Contents for Tree Frogs RAINFOREST COTTAGE W/TREEHOUSE PANELS

  • Page 2 Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 3 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 4 ● Be sure that the sealant you select is non-toxic and child safe. Your local Tree Frogs Wooden Swing Set Factory dealer may offer a complete power wash and reseal and maintenance program.
  • Page 5 Rock Wall: 150 Lbs. All Slides: 125 Lbs. Tree Frogs recommends that the weight limits for all components must not be exceeded. Failure to adhere to these and other safety guidelines could result in damage to the swing set. and/or injury to the users.
  • Page 6 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 7 And for a period of 1-Year Tree Frogs warranties all ropes, structural foam molded slides to be free of defects in material and workmanship. Fading is not considered a defect and may occur with seasonal and geographical conditions.
  • Page 8 Picture Description QTY. 601-1 26 1/2” Lower SB Side Panel Board 601-2 7 5/8” Wood Roof Fan Board #2 601-3 13 1/16” Wood Roof Fan Board #3 601-4 5 3/4” Chimney Block 601-5 7” Chimney Block #4 601-6 25 13/16” Wood Roof Fan Bottom 601-7 48 1/16”...
  • Page 9 Picture Description QTY. 601-8 52 3/16” Wood Roof Topper 601-9 10 1/16” Under Fan Board 601-10 26 1/2” Panel Board 601-11 6 1/4” Upper Lemonade Board 601-12 10 1/16” Under Fan Angled Board 601-13 11 1/4” Left Shutter Trapeze Side 601-14 11 1/4”...
  • Page 10 Picture Description QTY. 601-15 12” Left Window Shutter For Side 601-16 12” Right Window Shutter For Side 601-17 14 1/4” Lower Left Shutter 601-18 Lower Right Shutter 601-19 16 3/4” Left SB Shutter 601-20 16 3/4” Left SB Side Shutter 601-21 16 3/4”...
  • Page 11 Picture Description QTY. 601-22 16 3/4” Right SB Side Shutter 601-23 23 1/16” Corner Angle Board 601-24 26 1/2” Lower Panel Board 601-25 28 13/16” Corner Angle Board for SB Side 601-26 44 1/2” Lower Panel Board 601-27 17 1/4” Upper Panel Board 601-28 17 1/4”...
  • Page 12 Picture Description QTY. 601-29 24 9/16” SB Side Under Fan Center Board 601-30 26 1/16” Upper Panel Board For End Shutter 601-31 26 1/16” Upper Panel Board For End 601-32 26 1/2” Rail Picket 601-33 31 9/16” Under Fan Center Board SB Side 601-34 37 15/16”...
  • Page 13 Picture Description QTY. 601-36 12” Short 2- Hole Facia 601-37 12 3/4” Wood Roof Support (CC-011) 601-38 16” Tic Tac Toe Board 601-39 21” Center Support Facia 601-40 28 11/16” Panel Support 601-41 33 3/4” Wood Roof Center Support 601-42 44”...
  • Page 14 Picture Description QTY. (CC-029) 601-43 44” Slim 4- Hole Facia 601-44 47 13/16” Window Arches 601-45 56 13/16” Ladder Side Rail Support Facia 601-46 92 5/8” Rope Hole Facia 601-47 92 5/8” Upper 6- Hole Facia 601-48 48 1/16” Wood Roof Topper 601-49 52 3/16”...
  • Page 15 Picture Description QTY. 601-50 44” Picnic Table Board 601-51 8 3/8” Wood Roof Peak 601-52 26 1/2” Tic Tac Toe Filler Arch 601-53 44” Deck Board (CC-061) 601-54 28” 1- Rock Rockwall Board (CC-059) 601-55 28” 2- Rock Rockwall Board (CC-060) 601-56 28”...
  • Page 16 Picture Description QTY. 601-57 28” Rockwall Board w/ Rope Hole 601-58 32 1/4” Lemonade Counter 601-59 44” Window Top 601-60 44” Lemonade Facia (CC-072) 601-61 44” 4- Hole Facia 601-62 44” 6- Hole Facia 601-63 44” Picnic Seat Board...
  • Page 17 Picture Description QTY. 601-64 92 5/8” Deck Support 601-65 92 5/8” 10- Hole Facia 601-66 92 5/8” Ladder Side Runner 601-67 92 5/8” Rockwall Side Runner 601-68 8 5/16” Wood Roof Fan Plate 601-69 15 3/8” Picnic Seat Bench Support (CC-093) 601-70 17”...
  • Page 18 Picture Description QTY. 601-71 18 3/16” Outside Picnic Bench Support (CC-120) 601-72 22” Ladder Step (CC-096) 601-73 23 3/4” Ladder Support 601-74 32 5/8” Picnic Table Support 601-75 35” Wood Roof Support 601-76 65 1/8” Rockwall Support Leg 601-77 69 7/16” Left Ladder...
  • Page 19 Picture Description QTY. 601-78 69 7/16” Right Ladder 601-79 35” Wood Roof Extension 601-80 44” Lemonade 4- Hole Facia 601-81 92 5/8” Mainbeam 601-82 11 1/8” Picnic Seat 601-83 18 3/16” Trapeze Gusset 601-84 24 1/8” Picnic Table...
  • Page 20 Picture Description QTY. (CC-158) 601-85 44” Mainbeam 601-86 76 3/8” Trapeze Arm 601-87 103” Center Post 601-88 103” Corner Post 601-89 108 1/2” Corner Post 601-90 9 11/16” Chimney Block #2 601-91 13” Chimney Block...
  • Page 21 Picture Description QTY. 601-92 45 3/4” Lemonade Woof Roof Board 601-93 48 1/16” SB Wood Roof Board 601-94 52 3/16” (L) Wood Roof Board- Trapeze Side 601-95 52 3/16” (R) Wood Roof Board- Trapeze Side (CC-240) 601-96 7 7/8” Center A-Frame Block (CC-243) 601-97...
  • Page 22 Picture Description QTY. (CC-155) 601-99 70” A-Frame Crossmember (CC-156) 601-100 113” A-Frame Ladder (CC-185) 601-101 125” Universal Swingbeam...
  • Page 24 601-HWR-BAG- RAINFOREST COTTAGE BASE HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” Acorn Nut Plated 3/8” Hex Nut 3/8” x 1 1/2” Hex Bolt 1/4” x 1 1/2” Hex Lag Screw QTY.
  • Page 25 601-HWR-BAG- RAINFOREST COTTAGE BASE HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) A-12 A-13 A-14 Bag B 3/8” Bolt Cup #2 & 3 Drive Bit 8 x 80mm Spring Clip 1 1/2”...
  • Page 27 Picture Description QTY. 601-A 90 Degree Bracket 601-B Ladder/ Rockwall Bracket 601-C Swingbeam Tri-Plate 601-D Playgrip Safety Handle 601-E Playgrip U-Mount Ladder Handle 601-F 14’ Yellow Rope 601-G 16” Trapeze Bar w/ Rings...
  • Page 28 Picture Description QTY. 601-H 22” x 22” Chalkboard 601-I Disc Swing 601-J Tic Tac Toe 601-K Ductile Iron Swing Hanger 601-L Spiral Ground Anchors 601-M 56” Chained Belt Swing 601-N Rockwall Rocks...
  • Page 29 Picture Description QTY. 601-O Telescope 601-P 12” Ships’ Wheel 601-Q 45 Degree Swingbeam Bracket...
  • Page 30 Ladder Assembly PARTS NEEDED HARDWARE NEEDED 601-78- 69 7/16” Right Ladder Leg- E- 2 1/2” Coated Deck Screw- (20) 601-77- 69 7/16” Left Ladder Leg- A-3- 3/8” x 1 1/2” Hex Bolt- 601-72- 22” Ladder Step- A-11- 3/8” USS Flatwasher- 601-B- Ladder/ Rockwall Bracket- J- 3/8”...
  • Page 31 Ladder Assembly PARTS NEEDED HARDWARE NEEDED 601-73- 23 3/4” Ladder Support- E- 2 1/2” Coated Deck Screw- 601-E- U-Mount Ladder Handles- G- #14 x 1” Pan Phillips T/S- K- 1/4” USS Flatwasher-...

  • Page 32: Table Of Contents

    Rockwall Assembly PARTS NEEDED HARDWARE NEEDED 601-55- 28” 2- Rock Rockwall Board- H- 1/4” x 1 1/4” Pan Phillips M/S- (22) 601-54- 28” 1- Rock Rockwall Board- K- 1/4” USS Flatwasher- (22) 601-57- 28” Rockwall Board w/ Rope Hole- I- 1/4” T-Nut- (22) 601-76- 65 1/8”...

  • Page 33: 601-54- 28" 1- Rock Rockwall Board

    Rockwall Assembly Tic Tac Toe Assembly PARTS NEEDED HARDWARE NEEDED 601-55- 28” 2- Rock Rockwall Board- 601-54- 28” 1- Rock Rockwall Board- D- 2” Coated Deck Screw- (48) 601-57- 28” Rockwall Board w/ Rope Hole- 601-76- 64 1/8” Rockwall Support Leg- (2) 601-56- 28”...
  • Page 34 Wood Roof Fan A-Frame Blocks PARTS NEEDED HARDWARE NEEDED 601-2- 7 5/8” Wood Roof Fan Board #2- C- 1 5/8” Coated Deck Screw- (28) SB-9- 3/8” x 10” Hex Bolt- 601-3- 13 1/16” Wood Roof Fan Board #3- SB-20- 3/8” Bolt Cup- SB-17- 3/8”...
  • Page 35 Beam Assembly A-Frame Assembly PARTS NEEDED HARDWARE NEEDED 601-101- 125”Universal Swingbeam- SB-8- 3/8” x 7” Hex Bolt- SB-20- 3/8” Bolt Cup- 601-K- Ductile Iron Swing Hanger- SB-17- 3/8” USS Flatwasher- SB-15- 3/8” Split Lockwasher- SB-13- 3/8” Nylon Insert Locknut- SB-1- 3/8” Acorn Nut Plated- SB-6- 3/8”...
  • Page 36 A-Frame Assembly PARTS NEEDED HARDWARE NEEDED A-Frame- SB-10- 1/2” x 11 1/2” Hex Bolt- SB-18- 1/2” USS Flatwasher- 601-100- 113” A-Frame Leg- SB-16- 1/2” Split Lockwasher- SB-7- 1/2” Hex Nut- 601-Q- 45 Degree Swingbeam Bracket- SB-2- 1/2” Acorn Nut Plated- SB-4- 1/2”...
  • Page 37 Chimney Blocks PARTS NEEDED HARDWARE NEEDED 601-4 5 3/4” Chimney Block #4- E- 2 1/2” Coated Deck Screw- 601-5- 7” Chimney Block #3- 601-91- 13” Chimney Block #1- 601-90- Chimney Block #2-...

  • Page 38: K- 1/4" Uss Flatwasher

    Swingbeam Side Wall PARTS NEEDED HARDWARE NEEDED 601-85- 44” Swingbeam Top Joist- A-5- 3/8” x 6” Hex Bolt- A-12- 3/8” Bolt Cup- 601-89- 108 1/2” Corner Post- A-11- 3/8” USS Flatwasher- A-10- 3/8” Split Lockwasher- 601-43- 44” Slim 4- Hole Facia- A-2- 3/8”...
  • Page 39 Trapeze Side Wall PARTS NEEDED HARDWARE NEEDED 601-86- 76 3/8” Trapeze Arm- A-5- 3/8” x 6” Hex Bolt- A-12- 3/8” Bolt Cup- 601-43- 44” Slim 4- Hole Facia- A-11- 3/8” USS Flatwasher- A-10- 3/8” Split Lockwasher- 601-61- 44” 4- Hole Facia- A-2- 3/8”...
  • Page 40 Trapeze Side Wall PARTS NEEDED HARDWARE NEEDED 601-83- 18 3/16” Trapeze Gusset- A-8- 3/8” x 3 1/2” Hex Lag Screw- A-11- 3/8” USS Flatwasher- 601-K- Ductile Iron Swing Hanger- A-4- 3/8” x 4 1/2” Hex Bolt- A-12- 3/8” Bolt Cup- A-10- 3/8”...

  • Page 41: J- 3/8" T-Nut

    Main Assembly PARTS NEEDED HARDWARE NEEDED Trapeze Wall- K- 1/4” USS Flatwasher- (12) F- 1/4” x 3” Hex Lag Screw- (12) Swingbeam Wall- A-4- 3/8” x 4 1/2” Hex Bolt- A-11- 3/8” USS Flatwasher- 601-67- 92 5/8” Rockwall Side Runner- J- 3/8”...
  • Page 42 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-87- 103” Center Post- A-4- 3/8” x 4 1/2” Hex Bolt- A-11- 3/8” USS Flatwasher- 601-65- 92 5/8” 10- Hole Facia- J- 3/8” T-Nut- A-1- 3/8” Acorn Nut Plated- K- 1/4” USS Flatwasher- (14) F- 1/4”...
  • Page 43 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-84- 24 1/8” Picnic Table Leg- K- 1/4” USS Flatwasher- 601-71- 18 3/16” Outside Picnic Bench Support- F- 1/4” x 3” Hex Lag Screw- 601-34- 37 15/16” Picnic Seat Board- E- 2 1/2” Coated Deck Screw- (12) 601-42- 44”...
  • Page 44 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-74- 32 5/8” Picnic Table Support- K- 1/4” USS Flatwasher- 601-50- 44” Picnic Table Board- F- 1/4” x 3” Hex Lag Screw- E- 2 1/2” Coated Deck Screw- (24)
  • Page 45 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-70- 17” Gusset- K- 1/4” USS Flatwasher- (16) 601-69- 15 3/8” Picnic Seat Bench Support- F- 1/4” x 3” Hex Lag Screw- (12) 601-82- 11 1/8” Picnic Seat Leg- A-7- 1/4” x 2” Hex Lag Screw-...
  • Page 46 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-63- 44” Picnic Seat Board- E- 2 1/2” Coated Deck Screw- (24) 601-42- 44” Picnic Seat Board- 601-34- 37 15/16” Picnic Seat Board-...
  • Page 47 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-53- 44” Deck Board- (16) E- 2 1/2” Coated Deck Screw- (64) 601-64- 92 5/8” Deck Support- C- 1 5/8” Coated Deck Screw- (19)
  • Page 48 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-A- 90 Degree Bracket- K- 1/4” USS Flatwasher- (20) 601-70- 17” Gusset- G-#14 x 1” Pan Phillips T/S- A-6- 1/4” x 1 1/4” Hex Lag Screw- F- 1/4” x 3” Hex Lag Screw-...
  • Page 49 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-36- 12” Short 2- Hole Facia- K- 1/4” USS Flatwasher- (10) 601-45- 56 13/16” Ladder Side Rail Support Facia- F- 1/4” x 3” Hex Lag Screw- (10)
  • Page 50 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-39- 21” Center Support Facia- K- 1/4” USS Flatwasher- Rockwall Assembly- F- 1/4” x 3” Hex Lag Screw- G- #14 x 1” Pan Phillips T/S-...
  • Page 51 Main Assembly PARTS NEEDED HARDWARE NEEDED Ladder Assembly- K- 1/4” USS Flatwasher- Slide- G- #14 x 1” Pan Phillips T/S- H- 1/4” x 1 1/4” Pan Phillips M/S- I- 1/4” T-Nut- USING A 5/16” DRILL BIT DRILL HOLES FOR SLIDE...
  • Page 52 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-46- 92 5/8” Rope Hole Facia- K- 1/4” USS Flatwasher- 601-F- 14’ Yellow Rope- F- 1/4” x 3” Hex Lag Screw- SLIDE 601-F THROUGH 601-17 AND TIE A KNOT HOLDING IT IN PLACE. WORK YOUR WAY DOWN TYING A KNOT EVERY 2 TO 3 FEET UNTIL YOU STRING THE ROPE THROUGH 601-28 AND TIE A KNOT SECURING THE ROPE TO THE ROCKWALL.
  • Page 53 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-47- 92 5/8” Upper 6-Hole Facia- K- 1/4” USS Flatwasher- F- 1/4” x 3” Hex Lag Screw- 601-75- 35” Wood Roof Support- A-4- 3/8” x 4 1/2” Hex Bolt- A-12- 3/8” Bolt Cup- J- T-Nut- A-1- 3/8”...
  • Page 54 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-51- 8 3/8” Wood Roof Peak- D- 2” Coated Deck Screw- Fan Assembly- C- 1 5/8” Coated Deck Screw- (10)
  • Page 55 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-94- 52 3/16” (L) Wood Roof Board- Trapeze Side- C- 1 5/8” Coated Deck Screw- (32) 601-95- 52 3/16” (R) Wood Roof Board- Trapeze Side-...
  • Page 56 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-41- 33 3/4” Wood Roof Center Support- B- 1 1/2” Coated Deck Screw- 601-8- 52 3/16” Wood Roof Topper- E- 2 1/2” Coated Deck Screw- 601-49- 52 3/16” Wood Roof Topper-...
  • Page 57 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-94- 52 3/16” (L) Wood Roof Board- Trapeze Side- C- 1 5/8” Coated Deck Screw- (32) 601-95- 52 3/16” (R) Wood Roof Board- Trpaeze Side- B- 1 1/2” Coated Deck Screw-...
  • Page 58 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-43- 35” Wood Roof Support- A-4- 3/8” x 4 1/2” Hex Bolt- A-12- 3/8” Bolt Cup- 601-51- 8 3/8” Wood Roof Peak- J- 3/8” T-Nut- A-1- 3/8” Acorn Nut Plated- E- 2 1/2” Coated Deck Screw- D- 2”...
  • Page 59 Main Assembly PARTS NEEDED HARDWARE NEEDED Fan Assembly- C- 1 5/8” Coated Deck Screw- (10) 601-79- 35” Wood Roof Extension- E- 2 1/2” Coated Deck Screw- K- 1/4” USS Flatwasher- A-7- 1/4” x 2” Hex Lag Screw- MAKE THE 601-79’S EVEN WITH THE WOOD ROOF SUPPORTS...
  • Page 60 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-51- 8 3/8” Wood Roof Peak- D- 2” Coated Deck Screw- 601-93- 48 1/16” Wood Roof Board- C- 1 5/8” Coated Deck Screw- (32) REPEAT FOR BOTH SIDES OF WOOD ROOF...
  • Page 61 Main Assembly (Repeat for Both Sides) PARTS NEEDED HARDWARE NEEDED 601-41- 33 3/4” Wood Roof Center Support- B- 1 1/2” Coated Deck Screw- 601-7- 48 1/16” Wood Roof Topper- E- 2 1/2” Coated Deck Screw- 601-48- 48 1/16” Wood Roof Topper-...
  • Page 62 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-93- 48 1/16” SB Side Wood Roof Board- C- 1 5/8” Coated Deck Screw- (32) Chimney- B- 1 1/2” Coated Deck Screw- E- 2 1/2” Coated Deck Screw- REPEAT FOR BOTH SIDES OF WOOD ROOF...
  • Page 63 Main Assembly (Roof Removed for Visual Purposes) PARTS NEEDED HARDWARE NEEDED 601-C- Swingbeam Tri-Plate- SB-3- 1/2” x 3 1/2” Carriage Bolt- SB-19- 3/4” USS Flatwasher- A-Frame Assembly- SB-18- 1/2” USS Flatwasher- SB-16- 1/2” Split Lockwasher- SB-7- 1/2” Hex Nut- SB-2- 1/2” Acorn Nut Plated- SB-5- 1/2”...
  • Page 64 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-99- 72” A-Frame Crossmember- SB-17- 3/8” USS Flatwasher- SB-12- 3/8” x 5” Hex Lag Screw- SB-4- 1/2” x 7” Carriage Bolt- SB-19- 3/4” USS Flatwasher- SB-18- 1/2” USS Flatwasher- SB-16- 1/2” Split Lockwasher- SB-7- 1/2” Hex Nut- SB-2- 1/2”...
  • Page 65 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-M- 56” Chained Belt Swing- SB-21- 8 x 80mm Spring Clip- 601-F- 14’ Yellow Rope- 601-I- Disc Swing- SLIP THE ROPE THROUGH THE SWINGBEAM AND TIE A DOUBLE KNOT SECURING IT TO THE SWINGBEAM. THEN TIE A KNOT EVERY 2 TO 3 FEET UNTIL YOU PLACE THE 601-I ON THE ROPE AND TIE A DOUBLE KNOT KEEPING IT IN PLACE.
  • Page 66 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-P- 12” Ships’ Wheel- (Hardware with Accessories) 601-O- Telescope-...
  • Page 67 Main Assembly PARTS NEEDED HARDWARE NEEDED 601-G- 16” Trapeze Bar- A-14- 8 x 80mm Spring Clip- 601-L- Spiral Ground Anchor- A-11- 3/8” USS Flatwasher- SB-17- 3/8” USS Flatwasher- A-8- 3/8” x 3 1/2” Hex Lag Screw- SB-11- 3/8” x 3 1/2” Hex Lag Screw-...
  • Page 68 AT THIS POINT YOUR SWING SET SHOULD LOOK LIKE THIS. PROCEED TO THE RAIL OPTIONS SECTION.
  • Page 69 Open Air Rail Option (Skip for Treehouse Panel Rail Option) PARTS NEEDED HARDWARE NEEDED 601-32- 26 1/2” Rail Picket- (12) C- 1 5/8” Coated Deck Screw- (48)
  • Page 70 Open Rail Option PARTS NEEDED HARDWARE NEEDED 601-32- 26 1/2” Rail Picket- (17) C- 1 5/8” Coated Deck Screw- (68) RAILS ARE 1 9/16” APART RAILS ARE 1 9/16” APART...
  • Page 71 Open Rail Option PARTS NEEDED HARDWARE NEEDED Tic Tac Toe Assembly- C- 1 5/8” Coated Deck Screw- (16) 601-52- 26 1/2” Tic Tac Toe Filler Arch-...
  • Page 72 Open Rail Option PARTS NEEDED HARDWARE NEEDED 601-32- 26 1/2” Rail Picket- C- 1 5/8” Coated Deck Screw- 601-A- 90 Degree Brakcet- K- 1/4” USS Flatwasher- (12) G- #14 x 1” Pan Phillips T/S- (12)
  • Page 73 Open Rail Option PARTS NEEDED HARDWARE NEEDED 601-H- 22” x 22” Chalkboard- K- 1/4” USS Flatwasher- (12) 601-D- Playgrip Safety Handle- G- #14 x 1” Pan Phillips T/S- (12) PLACE SAFTEY HANDLES ON FOR THE LADDER AND ROCKWALL...
  • Page 74 Finished Open Rail Assembly...
  • Page 75 Treehouse Rail Option (ROOF REMOVED FOR VISUAL PURPOSES) PARTS NEEDED HARDWARE NEEDED 601-8- 26 1/2” Rail Picket- (30) C- 1 5/8” Coated Deck Screw- (120) 601-1- 26 1/2” Lower SB Side Panel Board-...
  • Page 76 Treehouse Rail Option (ROOF REMOVED FOR VISUAL PURPOSES) PARTS NEEDED HARDWARE NEEDED Tic Tac Toe Assembly- C- 1 5/8” Coated Deck Screw- (12) 601-32- 26 1/2” Tic Tac Toe Filer Arch-...
  • Page 77 Treehouse Rail Option (ROOF REMOVED FOR VISUAL PURPOSES) PARTS NEEDED HARDWARE NEEDED 601-32- 26 1/2” Rail Picket- (16) C- 1 5/8” Coated Deck Screw- (72) 601-10- 26 1/2” Panel Board-...
  • Page 78 Treehouse Rail Option (ROOF REMOVED FOR VISUAL PURPOSES) PARTS NEEDED HARDWARE NEEDED 601-A- 90 Degree Bracket- K- 1/4” USS Flatwasher- (16) 601-H- 22” x 22” Chalkboard- G- #14 x 1” Pan Phillips T/S- (16)
  • Page 79 Treehouse Rail Option (ROOF REMOVED FOR VISUAL PURPOSES) PARTS NEEDED HARDWARE NEEDED 601-D- Playgrip Safety Handle- K- 1/4” USS Flatwasher- G- #14 x 1” Pan Phillips T/S- PLACE SAFTEY HANDLES ON FOR THE LADDER AND ROCKWALL COMPLETED CLOSED RAIL OPTION. NEXT LETS FINISH THE TREEHOUSE PANEL INSTALL.
  • Page 80 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 602-44- 47 13/16” Window Arches- K- 1/4” USS Flatwasher- 602-27- 17 1/4” Upper Panel Board- F- 1/4” x 3” Hex Lag Screw- 602-28- 17 1/4” Upper Panel Board for Shutters- C- 1 5/8” Coated Deck Screw- (56) REPEAT FOR BOTH SIDES...
  • Page 81 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 602-8- 12” Left Shutter for Side- C- 1 5/8” Coated Deck Screw- (16) 602-9- 12” Right Shutter for Side- F- 1/4” x 3” Hex Lag Screw- 601-59- 44” Window Top- K- 1/4” USS Flatwasher- REPEAT FOR SWINGBEAM SIDE...
  • Page 82 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-23- 23 1/16” Corner Angled Board- C- 1 5/8” Coated Deck Screw- (18) 601-31- 26 1/16” Upper Panel Board For End- 601-30- 26 1/16” Upper Panel Board for End Shutters-...
  • Page 83 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-13- 11 1/4” Left Shutter for Trapeze Side- TP-1- 1 5/8” Coated Deck Screw- (34) 601-14- 11 1/4” Right Shutter for Trapeze Side- (2) 601-12- 10 1/16” Under Fan Angled Board- 601-9- 10 1/16” Under Fan Board-...
  • Page 84 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-40- 28 11/16” Panel Support- C- 1 5/8” Coated Deck Screw- (20) 601-59- 44” Window Top- F- 1/4” x 3” Hex Lag Screw- 601-25- 28 13/16” Corner Angle Board for SB Side- K- 1/4” USS Flatwasher- 601-40 SITS 3/4”...
  • Page 85 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-29- 24 9/16” SB Side under Fan Center Board- C- 1 5/8” Coated Deck Screw- (30) 601-33- 31 9/16” Under Fan Center Board for SB Side- (2) 601-9- 10 1/16” Under Fan Board- 601-12- 10 1/16”...
  • Page 86 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-40- 28 11/16” Panel Support- C- 1 5/8” Coated Deck Screw- (30) 601-20- 16 3/4” Left SB Side Shutter- 601-19- 16 3/4” Left SB Shutter- 601-22- 16 3/4” Right SB Shutter- 601-21- 16 3/4” Right SB Side Shutter- 602-29 SITS 3/4”...
  • Page 87 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-43- 44” Slim 4- Hole Facia- K- 1/4” USS Flatwasher- 601-80- 44” Lemonade 4- Hole Facia- F- 1/4” x 3” Hex Lag Screw-...
  • Page 88 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-60- 44” Lemonade Facia- F- 1/4” x 3” Hex Lag Screw- 602-24- 26 1/2” Lower Panel Board- (11) K- 1/4” USS Flatwasher- 602-26- 44 1/2” Lower Panel Board- C- 1 5/8” Coated Deck Screw- (56)
  • Page 89 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-11- 6 1/4” Upper Lemonade Board- (13) C- 1 5/8” Coated Deck Screw- (26) 601-37- 12 3/4” Lemonade Wood Roof Support- F- 1/4” x 3” Hex Lag Screw- K- 1/4” USS Flatwasher-...
  • Page 90 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-92- 45 3/4” Lemonade Woof Roof Board- C- 1 5/8” Coated Deck Screw- (10) 601-35- 8 1/4” Center Wood Roof Support-...
  • Page 91 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 601-58- 32 1/4” Lemonade Stand Counter- C- 1 5/8” Coated Deck Screw- (16) 601-17- 14 1/4” Lower Left Shutter- 601-18- 14 1/4” Lower Right Shutter-...