Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. 6.5 JAGUAR PLAYCENTER
  6. Manual

Tree Frogs 6.5 JAGUAR PLAYCENTER Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the 6.5 JAGUAR PLAYCENTER and is the answer not in the manual?

Questions and answers

Related Manuals for Tree Frogs 6.5 JAGUAR PLAYCENTER

Summary of Contents for Tree Frogs 6.5 JAGUAR PLAYCENTER

  • Page 2: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 3 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 4 ● Be sure that the sealant you select is non-toxic and child safe. Your local Tree Frogs Wooden Swing Set Factory dealer may offer a complete power wash and reseal and maintenance program.
  • Page 5 Rock Wall: 150 Lbs. All Slides: 125 Lbs. Tree Frogs recommends that the weight limits for all components must not be exceeded. Failure to adhere to these and other safety guidelines could result in damage to the swing set. and/or injury to the users.
  • Page 6 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 7 And for a period of 1-Year Tree Frogs warranties all ropes, structural foam molded slides to be free of defects in material and workmanship. Fading is not considered a defect and may occur with seasonal and geographical conditions.
  • Page 8 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. 462-1 43 7/8” Rockwall Board- Slim (CC-071) 462-2 43 7/8” Rockwall Board w/ Hole (CC-068) 462-3 43 7/8” 1- Rock Rockwall Board (CC-069) 462-4 43 7/8” 2- Rock Rockwall Board (CC-070) 462-5 43 7/8” Blank...
  • Page 9 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. (CC-100) 462-8 25” Rail Bottom (CC-099) 462-9 25” Rail Top (CC-103) 462-10 28” Rope Rung (CC-104) 462-11 30” Deck Runner (CC-116) 462-12 60 3/4” Center Tarp Board (CC-118) 462-13 67 1/2” Tarp Board...
  • Page 10 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. (CC-135) 462-15 30” Center Support Deck (CC-124) 462-16 54” Deck Board (CC-240) 462-17 7 7/8” Small A-Frame Block (CC-143) 462-18 9” Rope Block (CC-244) 462-19 13 3/8” A-Frame Block w/ Sinks (CC-243) 462-20 13 3/8”...
  • Page 11 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. (CC-148) 462-22 19” Left Gusset (CC-142) 462-23 25” Entrapment Block (CC-173) 462-24 38 7/8” Corner Post (CC-174) 462-25 70” Ground Runner (CC-175) 462-26 80 5/8” Center Post (CC-176) 462-27 100” Upper Rope Arm...
  • Page 12 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. (CC-178) 462-29 10 1/16” Lower Rope Runner 462-30 119 1/2” Top Joist 462-31 119 1/2” Swingbeam Top Joist (CC-188) 462-32 16” Left Gusset (CC-189) 462-33 16” Right Gusset 462-34 88 1/2” Left Rockwall 462-35 88 1/2”...
  • Page 13 KSI-462- 6.5 Jaguar Playcenter Lumber Description QTY. 462-36 88 1/2” Left Step Ladder Leg 462-37 88 1/2” Center Pipe & Step Ladder Leg 462-38 88 1/2” Right Pipe Ladder Leg (CC-245) 462-39 88” A-Frame Crossmember 462-40 107” Mainbeam (CC-184) 462-41 132 5/8”...
  • Page 14 KSI-456 JPC Wood Roof Description QTY. 456-1 15 3/8” Short Fan Board 456-2 19” Wood Roof Support 456-3 20 1/4” Center Fan Board 456-4 21” Long Fan Board (CC-020) 456-5 25” Wood Roof Support 456-6 69 3/4” Bottom Fan Board (CC198) 456-7 14”...
  • Page 15 KSI-456 JPC Wood Roof Description QTY. 456-8 67 1/2” Wood Roof Tarp Board 456-9 73 3/8” Left WR Runner 456-10 73 3/8” Right WR Runner 456-11 67 1/2” Wood Roof Board -Ripped 456-12 67 1/2” Wood Roof Board...
  • Page 16 KSI-457 JPC Treehouse Panel Description QTY. 457-1 24 13/16” Panel Support 457-2 4 1/2” Upper Panel Board #9 457-3 7 13/16” Upper Panel Board #2 457-4 10 1/4” Upper Panel Board #12 457-5 10 5/16” Upper Panel Board #3 457-6 16 3/4”...
  • Page 17 KSI-457 JPC Treehouse Panel Description QTY. 457-8 19 1/4” Upper Panel Board #6 457-9 19 13/16” Upper Panel Board #7 457-10 42 1/2” Upper Inside Panel Support 457-11 23” Upper Panel Board #11 457-12 6 15/16” Upper Panel Board #1 (CC-057) 457-13 14”...
  • Page 18 KSI-457 JPC Treehouse Panel Description QTY. 457-15 14 1/4” Upper Panel Board #4 457-16 23” Upper Panel Board #10 457-17 23 1/16” Upper Panel Board#8 (CC-089) 457-18 27 1/2” Lower Panel Filler Board...
  • Page 19 KSI-462- 6.5 JAGUAR PLAYCENTER HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) Bag- A-1 Bag-A-2 Bag- A-3 3/8”x-16 Acorn Nut Plated 1/2”- 13 Acorn Nut Plated 1/2”-13 x 4 1/2” Carriage Bolt ZP QTY;...
  • Page 20 KSI-462- 6.5 JAGUAR PLAYCENTER HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) Bag-A-10 Bag-A-9 Bag-B Bag-C #2 &#3 M10 x 80 Spring Clip #8 x 2 1/2” Coated Deck Screw 1/2”-13 Hex Nut ZP...
  • Page 21 KSI-462- 6.5 JAGUAR PLAYCENTER HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) Bag-N Bag-L Bag-M Bag-O Bag-P 1/4” Uss Flatwasher ZP 3/8” Split Lockwasher ZP 1/2” Split Lockwasher ZP 3/8”Uss Flatwasher Zp...
  • Page 22 KSI-462-SWINGBEAM HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-1 SBH-2 SBH-3 3/8”-16 Acorn Nut Plated 1/2”-13 Acorn Nut Plated 1/2”-13 x 3 1/2” Carriage Bolt ZP QTY;10 QTY;...
  • Page 23 KSI-462-SWINGBEAM HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-6 SBH-7 3/8”-13 Hex Nut ZP 1/2” -13 Hex Nut ZP QTY;2 QTY; 9 SBH-8 3/8”-16 x 7” Hex Bolt ZP QTY;8 SBH-9 3/8”-16 x 10”...
  • Page 24 KSI-462-SWINGBEAM HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-12 SBH-11 3/8” x 5 Hex Lag Screw ZP 3/8” x 3 1/2” Hex Lag Screw ZP QTY; 2 QTY;...
  • Page 25 KSI-456 -WOOD ROOF HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) Bag- A-2 Bag-A-3 Bag-A-1 3/8”- 16 x5 Carriage Bolt ZP #8 x 1 1/4” Coated Deck Screw 3/8”...
  • Page 26 457-TREEHOUSE PANELS- HARDWARE INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) Bag- A-1 Bag-A-2 Bag-A-3 #8 x 1 1/2” Coated Deck Screw #8 x 2” Coated Deck Screw #2 & #3 QTY;...
  • Page 27 Picture Description QTY. 462-A 48” Plastisol Coated Chain 462-B Tire Swivel 462-C Large Rocks 462-D 19” Ship’s Wheel 462-E 80” Chained Belt Swing 462-F 20” Trapeze-Bar w/ Rings-60”Chain 462-G 1”x 16’ Polyester Rope W/Rope Caps...
  • Page 28 Picture Description QTY. 462-H 1”x18’ Polyester Rope W/Rope Caps 462-I 21”x 63” Chain Ladder 462-J 1 1/4”Dia x 16 ga x 25” PlayGrip Tube,PC Coated 462-K 1 1/4”Dai x 16ga x 44” PlayGrip Tube,PC Coated 462-L Ductile Iron Swing Hanger 462-M 1 1/4”...
  • Page 29 Picture Description QTY. 462-O Swingbeam T Bracket 462-P Swingbeam 45 Degree Bracket 462-Q Heavy Duty Tire Eye Bolt 462-R Disc Swing 462-S Telescope...

  • Page 30: Parts Needed

    6.5 Rockwall Board Assembly PARTS NEEDED HARDWARE NEEDED CC-068-1-Rock Rockwall Board- I- 1/4”-20 x 1 1/4” Pan Phil M/S ZP- (26) CC-069-2- Rock Rockwall Board- K- 1/4”-20 x 7/16 4 Prong Tee Nut ZP- (26) 462-C- Large Rocks- (13) N- 1/4” Uss Flatwasher ZP- (26)
  • Page 31 6.5 Rockwall Assembly PARTS NEEDED HARDWARE NEEDED CC-071- Rope Hole Rockwall Board- 462-1- Rockwall Board -Slim- B- #8 x 2 1/2” Coated Deck Screw (68) CC-070- Rockwall Board -Blank- 462-34- Left Rockwall Leg- 462-35- Right Rockwall Leg-...
  • Page 32 6.5 Combo Ladder Assembly PARTS NEEDED HARDWARE NEEDED CC-133- Wood Step- E- 1/4” x 4 1/2” Hex Lag Screw ZP (20) 462-37- Center Step & Pipe Ladder Leg- N- 1/4” Uss Flatwasher ZP (20) 462-36- Left Step Ladder Leg- 462-38- Right Pipe Ladder Leg- 462-I- 21”x 63”...
  • Page 33 6.5 Combo Ladder Assembly HARDWARE NEEDED J- Metal Tap Screw-...

  • Page 34: Deck Assembly

    Deck Assembly PARTS NEEDED HARDWARE NEEDED CC-104- Deck Runner- B- #8 x 2 1/2” Coated Deck Screw- (72) CC-134- Deck Board Slim- CC-135- Center Deck Support- CC-124- Deck Board- Make 2 of these Assembly...

  • Page 35: Swingbeam Assembly

    6.5 Swingbeam Assembly PARTS NEEDED HARDWARE NEEDED CC-240- Center A-Frame Block- SBH-1- 3/8” Acorn Nut Plated- SBH-2- 1/2” Acorn Nut Plated- CC-243- A-Frame Block- SBH-6- 3/8” Hex Nut- SBH-7 1/2” Hex Nut- CC-244- A-Frame Block Sinked- SBH-15- 3/8” Split Lockwasher- SBH-16- 1/2”Split Lockwasher- CC-246- A-Frame Leg- SBH-17- 3/8”...
  • Page 36 6.5 Swingbeam Assembly PARTS NEEDED HARDWARE NEEDED CC-184- Jaguar Universal Swingbeam- SBH-1- 3/8”-16 Acorn Nut Plated- SBH-6- 3/8”-13 Hex Nut- 453-L- Ductile Iron Swing Hanger- SBH-8- 3/8”-16 x 7” Hex Bolt- SBH-13- 3/8” Nylon Insert- SBH-15- 3/8” Split Lockwasher- SBH-17- 3/8” Uss Flatwasher- SBH-20- 3/8”...
  • Page 37 6.5 Swingbeam Assembly PARTS NEEDED HARDWARE NEEDED Swingbeam Assemly- SBH-1- 3/8”-16 Acorn Nut Plated- SBH-2- 1/2” Acorn Nut Plated- A-Frame Legs Assembly- SBH-6- 3/8”-13 Hex Nut- SBH-7- 1/2” Hex Nut- SBH-15- 3/8” Split Lockwasher- SBH-16- 1/2”Split Lockwasher- SBH-17- 3/8” Uss Flatwasher- SBH-18- 1/2”...
  • Page 38 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Rockwall Assembly- F- 3/8” x 3 1/2” Hex Lag Screw- Ladder Assembly- G- 3/8”x 5 “ Hex Lag Screw- CC-149- Left Gusset- O- 3/8” Uss Flatwasher- (13) CC-148- Right Gusset- CC-174- Ground Runner- CC-178- Lower Rope Runner-...
  • Page 39 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Rockwall Assembly- A-5- 1/2” x 7” Carriage Bolt- A-2- 1/2” Acorn Nut Plated- Ladder Assembly- C- 1/2” Hex Nut- M- 1/2” Split Lockwasher- 462-40- Mainbeam- P- 1/2” Uss Flawasher- Q- 3/4” Uss Flatwasher-...
  • Page 40 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-188- Left Gusset- F- 3/8” x 3 1/2” Hex Lag Screw- (16) CC-189- Right Gusset- O- 3/8” Uss Flatwasher- (16)
  • Page 41 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Deck Assembly- E- 1/4”x 4 1/2” Hex Lag Screw- N- Uss Flatwasher-...
  • Page 42 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED 453-B- Tire Swivel- A-3- 1/2” x 4 1/2” Carriage Bolt- A-2- 1/2” Acorn Nut Plated- C- 1/2” Hex Nut- M- 1/2” Split Lockwasher- P- 1/2” Uss Flawasher- Q- 3/4” Uss Flat Washer- USING A 9/16”...
  • Page 43 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-173- Corner Post- A-4- 1/2” x 6 1/2” Carriage Bolt- A-2- 1/2” Acorn Nut Plated- CC-175- Center Post- C- 1/2” Hex Nut- M- 1/2” Split Lockwasher- P- 1/2” Uss Flawasher- Q- 3/4” Uss Flat Washer-...
  • Page 44 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED 462-30- Top Joist- A-4- 1/2” x 6 1/2” Carriage Bolt- A-2- 1/2” Acorn Nut Plated- 462-31- Top Joist -SB- C- 1/2” Hex Nut- M- 1/2” Split Lockwasher- P- 1/2” Uss Flawasher- Q- 3/4” Uss Flat Washer-...
  • Page 45 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-176- Upper Arm- A-4- 1/2” x 6 1/2” Carriage Bolt- A-2- 1/2” Acorn Nut Plated- CC-177- Trapeze Arm- C- 1/2” Hex Nut- M- 1/2” Split Lockwasher- 462-L- Ducile Iron Swing Hanger- P- 1/2” Uss Flawasher- Q- 3/4”...
  • Page 46 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-149- Left Gusset- F- 3/8” x 3 1/2” Hex Lag Screw- (12) CC-148- Right Gusset- O- 3/8” Uss Flatwasher- (12)
  • Page 47 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-100- Rail Bottom- G- 3/8” x 5” Hex Lag Screw- O- 3/8” Uss Flatwasher- CC-143- Rope Block- D- 1/4”x 3” Hex Lag Screw- N- 1/4”Uss Flatwasher- CC-142- Entrapment Block-...
  • Page 48 6.5 JPC Main Assembly PARTS NEEDED CC-103- Rope Rung- 462-G- 16’ Rope w/Rope Caps- 462-H- 18’ Rope w/Rope Caps-...
  • Page 49 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED 462-M- Safety Handle- H- #14 x 2” Pan Phillip T/S- (12) 462-N- PlayGrip Ladder Handle- N- 1/4” Uss Flatwasher- (12)
  • Page 50 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Tire- A-9- M10 x 80 Spring Clip- 462-A- 43” Plastisol Coated Chain- 462-Q- Heavy Duty Tire Eye Bolt-...
  • Page 51 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Slide- A-9- 8 x 80mm Spring Clip- 462-E- 20” Trapeze Bar W/ Ring-43” Chain- H- #14 x 2” Pan Phillip T/S- N- 1/4” Uss Flatwasher-...
  • Page 52 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED 462-D- 19” Ship’s Wheel- SBH-2- 1/2” Acorn Nut Plated- SBH-3- 1/2” x 3 1/2” Carriage Bolt- 462-O- Swingbeam T Bracket- SBH-7- 1/2” Hex Nut- SBH-16- 1/2” Split Lockwasher- 462-S- Telescope- SBH-18- 1/2” Uss Flatwasher- SBH-19- 3/4”...
  • Page 53 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED Swingbeam Assembly- SBH-2- 1/2” Acorn Nut Plated- SBH-4- 1/2”-13 x 7” Carriage Bolt- SBH-5- 1/2” x 9 Carriage Bolt- SBH-7- 1/2” Hex Nut- SBH-16- 1/2” Split Lockwasher- SBH-18- 1/2” Uss Flatwasher- SBH-19- 3/4” Uss Flat washer-...
  • Page 54 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED CC-182- A-Frame Crossmember- SBH-2- 1/2” Acorn Nut Plated- SBH-4- 1/2” x 7” Carriage Bolt- SBH-7- 1/2” Hex Nut- SBH-16- 1/2” Split Lockwasher- SBH-18- 1/2” Uss Flatwasher- SBH-19- 3/4” Uss Flat washer- USING A 9/16” DRILL BIT AT MARKED HOLE AND ASSEMBLE AS SHOWN...
  • Page 55 6.5 JPC Main Assembly PARTS NEEDED HARDWARE NEEDED 462-F- 80” Chained Belt Swing- SBH-21- 8 x 80mm Spring Clip- 462-G- 14’ Polyester Rope w/ Rope Caps- SBH-12- 3/8”x5” Hex Lag Screw- 462-R- Disc Swing- SBH-17- 3/8” USS Flat Washer- SBH-21...
  • Page 56 Tarp Option PARTS NEEDED HARDWARE NEEDED CC-116- Center Tarp Board- E- 1/4” x 4 1/2” Hex Lag Screw- N- 1/4” Uss Flatwasher- CC-118- Tarp Board- R- Phillips Screw Snap- Tarp- MARK THE PLACEMENT OF THE TARP SNAPS...
  • Page 57 Tarp Option...
  • Page 58 Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-8- Wood Roof Tarp Board- A-1- 3/8” Acorn Nut Plated- A-2- 3/8” x 5” Carriage Bolt- 456-9- Left WR Runner- A-5- 3/8-13 Hex Nut- A-8- 3/8” Split Lockwasher- 456-10- Right WR Runner- A-10- 3/8” Uss Flatwasher- A-11- 1/2”...
  • Page 59 Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-2- Wood Roof Support- A-3- 1 1/4” Coated Deck Screw- (36) CC-020- Wood Roof Support- A-4- 1 1/2” Coated Deck Screw- (136) 456-11- Wood Roof Board-Ripped- 456-12- Wood Roof Board- (32)
  • Page 60 Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-1- Short Fan Board- A-4- 1 1/2” Coated Deck Screw- (136) A-6- 1/4” x 1 1/2” Hex Lag Screw- (14) 456-3- Center Fan Board- A-9- 1/4” Uss Flatwasher- (14) 456-4- Long Fan Board- 456-6- Bottom Fan Board- 456-7- Center Fan Board- MAKE 2 OF THESE...
  • Page 61 WOOD ROOF...
  • Page 62 Open Rail PARTS NEEDED HARDWARE NEEDED CC-088- Rail Spindle- (15) B- 2 1/2” Coated Deck Screw- (60) CC-100- Rail Bottom- CC-099- Rail Top- MAKE 3 OF THESE CC-099...
  • Page 63 Open Rail Install PARTS NEEDED HARDWARE NEEDED Rail Assembly- D- 1/4”x3” Hex Lag Screw- E- 1/4” x 4 1/2” Hex Lag Screw- N- 1/4” Uss Flatwasher- (12)
  • Page 64 Closed Panel PARTS NEEDED HARDWARE NEEDED B- #8 x 2 1/2” Coated Deck Screw (30) CC-088- Rail Spindle- (15) A-4 #8 x 1 1/2” Coated Deck Screw (108) CC-100- Rail Bottom- CC-099- Rail Top- 457-1- Panel Support- CC-089- Lower Panel Filler Board- (12) MAKE 3 OF THESE...
  • Page 65 Closed Panel Install PARTS NEEDED HARDWARE NEEDED Solid Rail Assembly- D- 1/4” x 3” Hex Lag Screw- E- 1/4” x 4 1/2” Hex Lag Screw- N- 1/4” Uss Flatwasher- (12)
  • Page 66 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 457-2- Upper Panel #9- (12) 457-7- Window Arch- A-1- 1 1/2” Coated Deck Screw- (64) 457-11- Upper Panel Board #11- CC-057- Left Treehouse Shutter- CC-058- Right Treehouse Shutter- 457-16- Upper Panel Board #10- 457-17- Upper Panel Board #8-...
  • Page 67 Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED 457-3- Upper Panel Board #2- 457-4- Upper Panel Board #12- A-1- 1 1/2” Coated Deck Screw- (104) 457-5- Upper Panel Board #3- 457-6- Upper Panel Board #5- 457-8- Upper Panel Board #6- 457-9- Upper Panel Board #7- 457-10- Upper Inside Panel Support- 457-12- Upper Panel Board #1- 457-15- Upper Panel Board #4-...
  • Page 68 Treehouse Panel...