Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. 7.5 Mega Jaguar Playcenter
  6. Installation manual

Tree Frogs 7.5 Mega Jaguar Playcenter Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
7.5 Mega Jaguar Playcenter
Tape Measure
Phillips Screw Driver
Claw Hammeror Rubber Mallet
9/16" Deep Well Socket
Phillips Head Screw Bits
Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before
getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swingset recommended.
HOUSTON, TX 77041 • WWW.TREEFROGSSWINGSETS.COM • © 2018 KID STRUCTURES, LLC.
Installation Manual
Version 1B:18
Tools Needed for Assembly
24" Level
3/8" Cordless Drill or Electric Drill
Pliers or Vise Grips
3/4" Deep Well Socket
An Adult with two Adult Helpers
Angle Square
3/8" Drive Ratchet or Electric Impact Gun
7/16" Deep Well Socket
1/8", 1/4", and 9/16" Drill Bits

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7.5 Mega Jaguar Playcenter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tree Frogs 7.5 Mega Jaguar Playcenter

Summary of Contents for Tree Frogs 7.5 Mega Jaguar Playcenter

  • Page 1 7.5 Mega Jaguar Playcenter Installation Manual Version 1B:18 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...

  • Page 2: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will...
  • Page 3 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 4 ● Be sure that the sealant you select is non-toxic and child safe. Your local Tree Frogs Wooden Swing Set Factory dealer may offer a complete power wash and reseal and maintenance program.
  • Page 5 Rock Wall: 150 Lbs. All Slides: 125 Lbs. Tree Frogs recommends that the weight limits for all components must not be exceeded. Failure to adhere to these and other safety guidelines could result in damage to the swing set. and/or injury to the users.
  • Page 6 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 7 And for a period of 1-Year Tree Frogs warranties all ropes, structural foam molded slides to be free of defects in material and workmanship. Fading is not considered a defect and may occur with seasonal and geographical conditions.
  • Page 8 Description QTY. KSI-458 Jaguar Playcenter - MegaSized Base 458-01 Rockwall Board w/ Hole Box 2 of 3 458-02 1- Rock Rockwall Board Box 2 of 3 458-03 2- Rock Rockwall Board Box 2 of 3 458-04 Blank Rockwall Board Box 2 of 3 458-05 Rail Spindle Box 3 of 3...
  • Page 9 Description QTY. KSI-458 Jaguar Playcenter - MegaSized Base 458-08 Rail Bottom Box 1 of 3 458-09 Rail Top Box 1 of 3 458-10 Rope Rung Box 3 of 3 458-11 Deck Runner Box 3 of 3 458-12 Center Tarp Board Box 3 of 3 458-13 Tarp Board...
  • Page 10 Description QTY. KSI-458 Jaguar Playcenter - MegaSized Base 458-15 Deck Support Box 2 of 3 458-16 Deck Board Box 2 of 3 458-17 Rope Block Box 1 of 3 458-18 Left Gusset Box 1 of 3 458-19 Right Gusset Box 3 of 3 458-20 Entrapment Block Box 3 of 3...
  • Page 11 Description QTY. KSI-458 Jaguar Playcenter - MegaSized Base 458-22 Corner Post Box 1 of 3 458-23 Ground Runner Box 1 of 3 458-24 Center Post Box 3 of 3 458-25 Upper Rope Arm Box 1 of 3 458-26 Trapeze Arm Box 1 of 3 458-27 Lower Rope Arm...
  • Page 12 Description QTY. KSI-458 Jaguar Playcenter - MegaSized Base 458-29 Swingbeam Top Joist Box 1 of 3 458-30 Left Gusset Box 3 of 3 458-31 Right Gusset Box 3 of 3 458-32 Mainbeam Box 1 of 3 Description QTY. KSI-454 7.4 Jaguar Playcenter 454-01 Rockwall Board- Ripped...
  • Page 13 Description QTY. KSI-454 7.4 Jaguar Playcenter 454-04 1- Rock Rockwall Board Box 1 fo 4 454-05 Rope Rung Box 1 of 4 454-06 Ladder Step Box 1 of 4 454-07 Left Rockwall Leg Box 1 of 4 454-08 Right Rockwall Leg Box 1 of 4 454-09 Left Step Ladder Leg...
  • Page 14 Description QTY. KSI-454 7.4 Jaguar Playcenter 454-11 Right Pipe Ladder Box 1 of 4 013-01 Center A-Frame Block Box 2 of 4 013-02 A- Frame Block Box 2 of 4 013-03 A- Frame Block Sinked Box 2 of 4 013-04 4- Position Header Box 2 of 4 013-05...
  • Page 15 Jaguar Playcenter Wood Roof Option 456-1 456-2 456-3 456-4 Box 1 of 1 Box 1 of 1 Box 1 of 1 Box 1 of 1 Short Fan Board Wood Roof Support Center Fan Board 21 3/8” Long Fan Board QTY. 4 QTY.
  • Page 16 Description QTY. Jaguar Playcenter Treehouse Panels 457-01 Panel Support Box 1 of 1 457-02 Upper Panel Board Box 1 of 1 457-03 Upper Panel Board Box 1 of 1 457-04 Upper Panel Board Box 1 of 1 457-05 Upper Panel Board Box 1 of 1 457-06 Upper Panel Board...
  • Page 17 Description QTY. Jaguar Playcenter Treehouse Panels 457-08 Upper Panel Board Box 1 of 1 457-09 Upper Panel Board Box 1 of 1 457-10 Upper Inside Panel Support Box 1 of 1 457-11 Upper Panel Board Box 1 of 1 457-12 Upper Panel Board Box 1 of 1 457-13...
  • Page 18 Description QTY. Jaguar Playcenter Treehouse Panels 457-15 Upper Panel Board Box 1 of 1 457-16 Upper Panel Board Box 1 of 1 457-17 Upper Panel Board Box 1 of 1 457-18 Lower Panel Filler Board Box 1 of 1...
  • Page 19 Description QTY. 7.4 Jaguar Playcenter MegaSized 454-A 60” Chained Belt Swing 454-B Tire Swivel 454-C Rockwall Rocks 454-D 19” Ships Wheel 454-E 90” Chained Belt Swing 454-F 20” Trapeze Bar 454-G 16’ Yellow Rope...
  • Page 20 Description QTY. 7.4 Jaguar Playcenter MegaSized 454-H 18’ Yellow Rope 454-I 19’ Yellow Rope 454-J 21” x 63” Chain Ladder 454-K 25” Playgrip Tube 454-L 44” Playgrip Tube 454-M Ductile Iron Swing Hanger 454-N Playgrip Handle...
  • Page 21 Description QTY. 7.4 Jaguar Playcenter MegaSized 454-O Playgrip Ladder Handle 454-P Swingbeam T-Bracket 454-Q Swingbeam 45 Degree Bracket 454-R Heavy Duty Tire Swing Eye Bolt 454-S Disc Swing 454-T Telescope...
  • Page 22 458-HWR (JAGUAR PLAYCENTER MEGASIZED HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 1/2” Acorn Nut Plated 1/2” 6 1/2” Carriage Bolt QTY. 4 QTY. 4 1/2” Hex Nut 1/4”...
  • Page 23 458-HWR (JAGUAR PLAYCENTER MEGASIZED HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) A-10 3/8” USS Flatwasher 1/2” USS Flatwasher 3/4” USS Flatwasher 2 1/2” Coated Deck Screw QTY.
  • Page 24 454-HWR (7.4 JAGUAR PLAYCENTER HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” Acorn Nut Plated 1/2” Acorn Nut Plated 1/2” x 4 1/2” Carriage Bolt QTY. 4 QTY.
  • Page 25 454-HWR (7.4 JAGUAR PLAYCENTER HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” x 5” Hex Bolt 3/8” Nylon Insert Locknut 3/8” Bolt Cup QTY. 4 QTY. 4 QTY.
  • Page 26 454-HWR (7.4 JAGUAR PLAYCENTER HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” x 3 1/2” Hex Lag Screw 3/8” x 5” Hex Lag Screw QTY. 37 QTY.
  • Page 27 454-HWR (7.4 JAGUAR PLAYCENTER HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/4” USS Flatwasher 5/8” Phillips Screw Snap QTY. 22 QTY. 9 ***Note: Hardware Pictures above may not be to scale, please use a Tape Measure to Verify Length. Measurement should be taken from the bottom of the bolt head to the bottom of the bolt.*** **NOTE: HARDWARE PICTURES ARE FOR ILLUSTRATIVE PURPOSES ONLY AND MAY DIFFER FROM THE ACTUAL PRODUCT.
  • Page 28 454-SB-HWR (7.4 JAGUAR PLAYCENTER SWINGBEAM HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” Acorn Nut Plated 1/2” Acorn Nut Plated 1/2” x 3 1/2” Carriage Bolt QTY.
  • Page 29 454-SB-HWR (7.4 JAGUAR PLAYCENTER SWINGBEAM HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 1/2” x 13” Carriage Bolt QTY. 1 3/8” Hex Nut 1/2” Hex Nut QTY. 3 QTY.
  • Page 30 454-SB-HWR (7.4 JAGUAR PLAYCENTER SWINGBEAM HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) A-11 1/2” x 11 1/2” QTY. 1 A-12 A-13 3/8” x 3 1/2” Hex Lag Screw 3/8”...
  • Page 31 454-SB-HWR (7.4 JAGUAR PLAYCENTER SWINGBEAM HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) A-19 A-20 A-21 A-22 1/2” USS Flatwasher 3/4” USS Flatwasher 3/8” Bolt Cup 10 x 100mm Spring Clip QTY.
  • Page 32 456-HWR-BAG (JAGUAR PLAYCENTER WOOD ROOF HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 3/8” Acorn Nut Plated 3/8” x 5” Carriage Bolt 1 1/4” Coated Deck Screw QTY.
  • Page 33 457-HWR (JAGUAR PLAYCENTER TREEHOUSE PANELS HARDWARE BAG) INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) 1 1/2” Coated Deck Screw 2” Coated Deck Screw #2 & 3 Drive Bit Qty.

  • Page 34: Parts Needed

    7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 454-06- Wood Step- 454-09- Left Wood Step Ladder- E- 1/4” x 4 1/2” Hex Lag Screw- (28) 454-10- Right Step Ladder Leg - 454-L- 1 1/4” x 44” Playgrip Tube- N- 1/4” USS Flatwasher- (28) 454-J- 21”...
  • Page 35 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-27- Lower Rope Arm- J- 2” Metal Tap Screw- G- 3/8” x 5” Hex Lag Screw- O- 3/8” USS Flatwasher- Step/ Chain Ladder Assembly...
  • Page 36 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-18- Left Gusset Bracket- F- 3/8” x 3 1/2” Hex Lag Screw- 458-19- Right Gusset Bracket- O- 3/8” USS Flatwasher- 458-O- Playgrip Ladder Handle- H- #14 x 2” Pan Phillips T/S- N- 1/4”...
  • Page 37 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-2- Rockwall Board 1-Rock- 458-3- 2- Rock Rockwall Board- I- 1/4” x 1 1/4” Pan Phillips M/S- (30) 458-4- Rockwall Board- Blank- 458-1- Rockwall Board w/ Rope Hole- N- 1/4” USS Flatwasher- (30) 454-07- Left Rockwall Leg- 454-08- Right Rockwall Leg-...
  • Page 38 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-23- Ground Runner- G- 3/8” x 5” Hex Lag Screw- 458-18- Left Gusset Bracket- O- 3/8” USS Flatwasher- 458-19- Right Gusset Bracket- F- 3/8” x 3 1/2” Hex Lag Screw- Rockwall Assembly...
  • Page 39 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED Rockwall Assembly- A-5- 1/2” x 7” Carriage Bolt- Q- 3/4” USS Flatwasher- Ladder Assembly- P- 1/2” USS Flatwasher- M- 1/2” Split Lockwasher- 458-32- Playcenter Mainbeam- C- 1/2” Hex Nut- A-2- 1/2” Acorn Nut Plated- 458-31- Right Gusset- F- 3/8”...
  • Page 40 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-24- Center Post- A-4- 1/2” x 6 1/2” Carriage Bolt- (12) Q- 3/4” USS Flatwasher- (12) 458-22- Corner Post- P- 1/2” USS Flatwasher- (12) M- 1/2” Split Lockwasher- (12) 458-28- Top Joist- C- 1/2”...
  • Page 41 7.4 Jaguar Playcenter MegaSized Installation (For Cabin Install See Cabin Insert) PARTS NEEDED HARDWARE NEEDED FROM MEGA HARDWARE 458-14- Deck Board- Slim- 458-16- Deck Board- Wide- (12) B- 2 1/2” Coated Deck Screw- (42) A-5- 1/4” x 4 1/2” Hex Lag Screw- 458-11- Universal Deck Runner- A-8- 1/4”...
  • Page 42 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED (For Cabin Install See Cabin Insert) FROM MEGA HARDWARE 458-25- Upper Rope Arm- 458-26- Trapeze Arm- A-2- 1/2” x 6 1/2” Carriage Bolt- A-11- 3/4” USS Flatwasher- 458-21- Mid Rail Post- A-10- 1/2”...
  • Page 43 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-18- Left Gusset Bracket- F- 3/8” x 3 1/2” Hex Lag Screw- (12) 458-19- Right Gusset Bracket- O- 3/8” USS Flatwasher- (12)
  • Page 44 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED FROM MEGA HARDWARE 458-7- Mega Rail Bottom- 458-8- Universal Rail Bottom- A-4- 1/4” x 3” Hex Lag Screw- A-8- 1/4” USS Flatwasher- 7.4 HARDWARE D- 1/4” x 3” Hex Lag Screw- N- 1/4”...
  • Page 45 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED FROM MEGA HARDWARE 458-6- Mid Rail Top- 458-7- Mid Rail Bottom- B- 2 1/2” Coated Deck Screw- (32) A-5- 1/4” x 4 1/2” Hex Lag Screw- 458-5- Rail Spindle- (23) A-8- 1/4” USS Flatwasher- (16) A-4- 1/4”...
  • Page 46 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED Large Rail- FROM 7.4 HARDWARE 458-20- Entrapment Block- N- 1/4” USS Flatwasher- (12) E- 1/4” x 4 1/2” Hex Lag Screw- D- 1/4” x 3” Hex Lag Screw- O-3/8” USS Flatwasher- G-3/8”...
  • Page 47 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED Slide- H- #14 x 2” Pan Phillips T/S- (11) 454-N- Playgrip Safety Handle- N- 1/4” USS Flatwasher- (11)
  • Page 48 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-10- Rope Rung- A-6- 3/8” x 5” Hex Bolt- 454-05- Rope Rung- A-8- 3/8” Bolt Cup- 454-I- 18’ Yellow Rope- O- 3/8” USS Flatwasher- 454-M- Ductile Hangers- L- 3/8” Split Lockwasher- A-7- 3/8”...
  • Page 49 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 458-17- Rope Block- O- 3/8” USS Flatwasher- 452-F- 20” Trapeze Bar w/ Rings- G- 3/8” x 5” Hex Lag Screw- A-9- Spring Clips 10 x 100 mm-...
  • Page 50 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 454-G- 16’ Yellow Rope- E- 1/4” x 4 1/2” Hex Lag Screw- 458-12- Center Tarp Board- N- 1/4” USS Flatwasher- 458-13- Tarp Board- ( For Wood Roof Skip Tarp Install) Slide one end the 454-G Rope through the Rope Block and tie a good knot. Then make a knot about a 1 to 1 1/2 ft below the Rope Block, Repeat until you can slip the rope through the rockwall and tie another knot securing the rope.
  • Page 51 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED Unit Tarp- R- 5/8” Phillips Screw Snap- Take one corner of the VINYL TARP and place it flush in the corner. Tap the snap with a blunt object, leaving an indention of the snap in the wood. Repeat this process until all the snaps have been indented in the wood on both sides of the Playcenter.
  • Page 52 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED 454-R- Tire Eye Bolts- 454-A- 60” Plastisol Coated Chain-...
  • Page 53 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 454-B- Tire Swivel- A-3- 1/2” x 4 1/2” Carriage Bolt- Q- 3/4” USS Flatwasher- P- 1/2” USS Flatwasher- M- 1/2” Split Lockwasher- C- 1/2” Hex Nut- A-2- 1/2” Acorn Nut Plated- Using a pencil or pen mark the holes in the center of the deck.
  • Page 54 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 454-T- Telescope- Hardware w/ Accessories 454-D- 19” Ship’s Wheel-...
  • Page 55 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 013-01- Center A-Frame Block- A-9- 3/8” x 10” Hex Bolt- A-21- 3/8” Bolt Cup- 013-02- A- Frame Block- A-18- 3/8” USS Flatwasher- A-16- 3/8” Split Lockwasher- 013-03- A-Frame Block Sinked- A-7- 3/8” Hex Nut- A-1- 3/8”...
  • Page 56 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 013-07- 4 Position Swingbeam- A-10- 3/8” x 10 1/2” Hex Bolt- (12) A-21- 3/8” Bolt Cup- (14) 013-04- 4 Position Header- A-18- 3/8” USS Flatwasher- (15) A-16- 3/8” Split Lockwasher- (14) 454-M- Ductile Iron Swing Hanger- A-14- 3/8”...
  • Page 57 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 454-P- Swingbeam T-Bracket- A-3- 1/2” x 3 1/2” Carriage Bolt- A-20- 3/4” USS Flatwasher- A-19- 1/2” USS Flatwasher- A-17- 1/2” Split Lockwasher- A-8- 1/2” Hex Nut- A-2 1/2” Acorn Nut Plated-...
  • Page 58 7.4 Jaguar Playcenter MegaSized Installation PARTS NEEDED HARDWARE NEEDED 013-05- A-Frame Crossmember- A-5- 1/2” x 10” Carriage Bolt- A-6- 1/2” x 13” Carriage Bolt- A-20- 3/4” USS Flatwasher- A-19- 1/2” USS Flatwasher- A-17- 1/2” Split Lockwasher- A-8- 1/2” Hex Nut- A-2- 1/2”...
  • Page 59 7.4 Jaguar Playcenter MegaSized Installation HARDWARE NEEDED SBH-17- 3/8” USS Flatwasher- SBH-12- 3/8” x 5” Hex Lag Screw-...
  • Page 60 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-1- Short Fan Board- 456-3- Center Fan Board- A-4- 1 1/2” Coated Deck Screw- (40) 456-4- Long Fan Board- 456-6- Bottom Fan Board- 456-7- Center Fan Board- Make 2 Fan Assemblies Remove Center Tarp Board...
  • Page 61 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-8- Wood Roof Top Board- A-7- 1/4” x 4 1/2” Hex Lag Screw- A-9- 1/4” USS Flatwasher- 456-10- Right Wood Roof Runner- A-2- 3/8” x 5” Carriage Bolt- A-11- 1/2” USS Flatwasher- 456-9- Left Wood Roof Runner- A-10- 3/8”...
  • Page 62 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-12- Wood Roof Board- (10) A-4- 1 1/2” Coated Deck Screw- (40) 456-5- Wood Roof Support- A-3- 1 1/4” Coated Deck Screw- (10) Repeat for Both Sides of Wood Roof Repeat for Both Sides of Wood Roof...
  • Page 63 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-12- Wood Roof Board- (10) A-4- 1 1/2” Coated Deck Screw- (40) 456-5- Wood Roof Support- A-3- 1 1/4” Coated Deck Screw- (10) Repeat for Both Sides of Wood Roof Repeat for Both Sides of Wood Roof...
  • Page 64 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-12- Wood Roof Board- (12) A-4- 1 1/2” Coated Deck Screw- (48) 456-2- Wood Roof Support- A-3- 1 1/4” Coated Deck Screw- (12) Repeat for Both Sides of Wood Roof Repeat for Both Sides of Wood Roof...
  • Page 65 Jaguar Playcenter Installation - Wood Roof Option PARTS NEEDED HARDWARE NEEDED 456-11- Wood Roof Board- Ripped- A-4- 1 1/2” Coated Deck Screw- Fan Assembly- A-3- 1 1/4” Coated Deck Screw- A-6- 1/4” x 1 1/2” Hex Lag Screw- (14) A-9- 1/4” USS Flatwasher- (14) Repeat for Both Sides of Wood Roof Repeat for Both Sides of Wood Roof...
  • Page 66 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-11- Upper Panel Board #11- A-1- 1 1/2” Coated Deck Screw- (32) 457-16- Upper Panel Board #10- (Repeat for both sides) PG. 1...
  • Page 67 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-02- Upper Panel Board #9- (12) A-1- 1 1/2” Coated Deck Screw- (40) 457-17- Upper Panel Board #8- (Repeat for both sides) PG. 2...
  • Page 68 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-07- Window Arch- A-1- 1 1/2” Coated Deck Screw- (56) 457-13- Left Treehouse Shutter- 457-14- Right Treehouse Shutter- (Repeat for both sides) PG. 3...
  • Page 69 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-04- Upper Panel Board #12- A-1- 1 1/2” Coated Deck Screw- (16) 457-09- Upper Panel Board #7- (Repeat for both sides) PG. 4...
  • Page 70 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-08- Upper Panel Board #6- JPH-1- 1 1/2” Coated Deck Screw- (24) 457-06- Upper Panel Board #5- (Repeat for both sides) PG. 5...
  • Page 71 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-06- Upper Panel Board #5- A-1- 1 1/2” Coated Deck Screw- (16) 457-05- Upper Panel Board #3- (Repeat for both sides) PG. 6...
  • Page 72 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-03- Upper Panel Board #2- A-1- 1 1/2” Coated Deck Screw- (16) 457-12- Upper Panel Board #1- (Repeat for both sides) PG. 7...
  • Page 73 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-10- Upper Panel Inside Support- A-1- 11 /2” Coated Deck Screw- (32) (Repeat for both sides) Remove Rails if not done. PG. 8...
  • Page 74 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED 457-9- Lower Panel Support- Rail Hardware- (36) (Make 3 Filled Rail Assemblies) PG. 9...
  • Page 75 Jaguar Playcenter Installation - Treehouse Panels Option PARTS NEEDED HARDWARE NEEDED Original Rail Hardware- (3-Sets) Rail Assemblies- PG. 10...