Table of Contents
Advertisement
DT4240 xx xx xx xx
Function
Sequence of operations 1. Enter the menu with the supervisor code.
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
Exit from the menu
20230503-V0
7.5. Leading zero(s) enable / disable (06. menu item)
Leading zero(s): valueless zero(s) prior number.
E.g. the 98.3 V value the instrument able to display in two
different format:
[factory default] or without leading zero:
In this menu item can set this two display modes.
The way the code should be type in can be found in
Chapter 7.1. Typing the code in. You see on the display:
.
2. Keep stepping by pressing the ▲ button as long as you
see this menu item:
3. Enter the menu item by pressing the ENTER button.
4. You see the mnemonic
mnemonic is blinking indicating that it can be modify.
it signs that it can be modify.
5. Pressing the ▲ button you can disable or enable the
leading zeros:
•
= (Space = space) space(s) is (are) display
instead of zero(s).
•
= leading zero(s) is (are) displayed [factory
default].
from the given menu item, and you see:
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the Sequence of
operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.
(Null = zero).
on the display. The
(Exit) are shown on the display.
.
.
(Save),
33
Advertisement
Table of Contents
