Table of Contents
Advertisement
Function
Sequence of operations Read the chapter 7.1. Functions of the push-buttons during
Notice
Function
Sequence of operations Read the chapter 7.1. Functions of the push-buttons during
26
7.9. Menu item 05: High value of scale
Any optional display range can be assigned to the input signal range
(scaling). Here you can set the high value of the desired display
range.
[Factory default: 100.00]
Note! For scaling the displayed value you should set the low value
also. (Previous menu item.)
navigation in the menu for learning the buttons handle.
1. Enter the menu by typing the supervisor code.
2. Keep stepping by pressing the ▲ button as long as you see this
menu item.
3. Enter the menu item by pressing the Menu button.
4. Type the desired value by using the ▲ and the ► buttons.
5. Exit from menu item by pressing the Esc button. The change is
saved to FRAM.
(6. Press Esc button again if you want to leave the menu.)
For scaling must be assign the low (start) value also. (Previous menu
item)
7.10. Menu item 06: Enable / disable displaying the leader zeros
Leader zero: the zeros that stand in front of an integer of no value.
E.g. the instrument displays the value 5.2 together with the leader
zeros:
005.20 (default factory setting), or without the leader zeros: 5.20.
In this menu item you can either disable displaying of the leader zeros
or you can enable this function again.
navigation in the menu for learning the buttons handle.
1. Enter the menu by typing the supervisor code.
2. Keep stepping by pressing the ▲ button as long as you see this
menu item.
3. Enter the menu item by pressing the Menu button.
4. Pressing the ▲ button, select the desired value.
5. Exit from menu item by pressing the Esc button. The change is
saved to FRAM.
(6. Press Esc button again if you want to leave the menu.)
The selectable values: NULL (enabled) or SPACE (disabled).
DT4227 UI (PS)
20200205-V0
Advertisement
Table of Contents
