Rear Panels - ZyXEL Communications VMG Series User Manual
Hide thumbs
Also See for VMG Series:
- User manual (395 pages) ,
- User manual (520 pages) ,
- User manual (424 pages)
Table of Contents
Advertisement
VMG8623-T50A LED Descriptions (continued)
LED
SFP
Table 15 VMG1312-T20B LED Descriptions
LED
POWER
ETHERNET1~
4
WLAN
WPS
DSL
INTERNET
USB
1.4.3 Rear Panels
The connection ports are located on the rear panel, with some models' USB port on the side panel.
Chapter 1 Introducing the Zyxel Device
COLOR
STATUS
DESCRIPTION
Green
On
A fiber link is up.
Off
A fiber link is down.
COLOR
STATUS
DESCRIPTION
Green
On
The Zyxel Device is receiving power and ready for use.
Blinking
The Zyxel Device is self-testing.
Red
On
The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking
The Zyxel Device is upgrading firmware.
Off
The Zyxel Device is not receiving power.
Green
On
The Zyxel Device has a successful 10/100 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking
The Zyxel Device is sending or receiving data to/from the LAN at 10/100
Mbps.
Off
The Zyxel Device does not have an Ethernet connection with the LAN.
Green
On
The wireless network is activated.
Blinking
The Zyxel Device is communicating with wireless clients.
Green
Blinking
The Zyxel Device is setting up a WPS connection with a wireless client.
Off
The wireless network is not activated.
Green
On
The VDSL line is up.
Blinking
The Zyxel Device is initializing the VDSL line.
Off
The DSL line is down.
Green
On
The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server). PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking
The VMG is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
Red
On
The VMG attempted to make an IP connection but failed. Possible causes
are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green
On
The Zyxel Device recognizes a USB connection through the USB slot.
Blinking
The Zyxel Device is sending/receiving data to/from the USB device
connected to it.
Off
The Zyxel Device does not detect a USB connection through the USB slot.
VMG/XMG Series User's Guide
46
Advertisement
Table of Contents
