Leds (Lights) - ZyXEL Communications VMG Series User Manual
Hide thumbs
Also See for VMG Series:
- User manual (395 pages) ,
- User manual (520 pages) ,
- User manual (424 pages)
Table of Contents
Advertisement
Figure 24 VMG1312-T20B Front Panel
1.4.2 LEDs (Lights)
None of the LEDs are on if the Zyxel Device is not receiving power.
Table 4 VMG1312-B10D LED Descriptions
LED
POWER
DSL
INTERNET
Chapter 1 Introducing the Zyxel Device
COLOR
STATUS
DESCRIPTION
Green
On
The Zyxel Device is receiving power and ready for use.
Blinking
The Zyxel Device is self-testing.
Red
On
The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Off
The Zyxel Device is not receiving power.
Green
On
The DSL line is up.
Blinking
The Zyxel Device is initializing the DSL line.
Off
The DSL line is down.
Green
On
The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking
The Zyxel Device is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
Red
On
The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
VMG/XMG Series User's Guide
33
Advertisement
Table of Contents
