View Certificate Request - ZyXEL Communications VMG Series User Manual

Figure 189 Create Certificate Request
The following table describes the labels in this screen.
Table 115 Create Certificate Request
LABEL
Certificate
Name
Common Name
Organization
Name
State/Province
Name
Country/Region
Name
Cancel
OK

22.3.2 View Certificate Request

Click the View icon in the Local Certificates screen to open the following screen. Use this screen to view
in-depth information about the certificate request. The Certificate is used to verify the authenticity of the
certification authority. The Private Key serves as your digital signature for authentication and must be
safely stored.
Chapter 22 Certificates
DESCRIPTION
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Select Auto to have the Zyxel Device configure this field automatically. Or select Customize to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or email address in the field
provided. The domain name or email address can be up to 63 ASCII characters. The domain
name or email address is for identification purposes only and can be any string.
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the Zyxel Device drops trailing
spaces.
Type up to 32 characters to identify the state or province where the certificate owner is located.
You may use any character, including spaces, but the Zyxel Device drops trailing spaces.
Select a country to identify the nation where the certificate owner is located.
Click Cancel to exit this screen without saving.
Click OK to save your changes.
VMG/XMG Series User's Guide
292