Rear Panel - ZyXEL Communications LTE3202-M430 User Manual

Table 1 Front Panel LEDs
LED
LAN
WiFi/WPS
SMS

1.5.2 Rear Panel

To turn on the device, press the power button.
Figure 3 LTE3202-M430 Power Button
1.5.2.1 SIM Card Slot
The LTE3202-M430 comes with a built-in 2G/3G/4G/LTE module for mobile connections. To set up a
mobile connection using the built-in 2G/3G/4G/LTE module, just insert a SIM card into the SIM card slot
at the back of the LTE3202-M430.
Note: You must insert the SIM card into the card slot before turning on the LTE3202-M430.
1.5.2.2 The WPS Button
Your LTE3202-M430 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the WiFi Alliance.
Chapter 1 Introduction
COLOR STATUS DESCRIPTION
Blue On The LTE3202-M430 has an Ethernet LAN connection.
Blinking The LTE3202-M430 is transmitting/receiving data through the Ethernet
LAN connection.
Off The LTE3202-M430 does not detect and Ethernet LAN connection.
Blue On The LTE3202-M430 is ready and the 2.4GHz wireless LAN is on, and is
sending/receiving data through the wireless LAN.
Blinking The LTE3202-M430 is connecting to a 2.4GHz WiFi-Connection via
WPS.
Off The LTE3202-M430 wireless LAN interface is not ready.
Blue Blinking The LTE3202-M430 has unread SMS messages.
Off The LTE3202-M430 has no unread SMS messages.
LTE3202-M430 User's Guide
12