Interface Grouping; Chapter 15 Interface Grouping; Interface Grouping Overview; What You Can Do In This Chapter - ZyXEL Communications VMG Series User Manual

15.1 Interface Grouping Overview

By default, all LAN and WAN interfaces on the Zyxel Device are in the same group and can
communicate with each other. Create interface groups to have the Zyxel Device assign IP addresses in
different domains to different groups. Each group acts as an independent network on the Zyxel Device.
Devices in different groups cannot communicate with each other directly. This lets devices connected
to an interface group's LAN interfaces communicate through the interface group's WAN or LAN
interfaces but not other WAN or LAN interfaces.

15.1.1 What You Can Do in this Chapter

The Interface Grouping screens let you create multiple networks on the Zyxel Device
page 258).

15.2 The Interface Grouping Screen

You can manually add a LAN interface to a new group. Alternatively, you can have the Zyxel Device
automatically add the incoming traffic and the LAN interface on which traffic is received to an
interface group when its DHCP Vendor ID option information matches one listed for the interface group.
Use the LAN screen to configure the private IP addresses the DHCP server on the Zyxel Device assigns to
the clients in the default and/or user-defined groups. If you set the Zyxel Device to assign IP addresses
based on the client's DHCP Vendor ID option information, you must enable DHCP server and configure
LAN TCP/IP settings for both the default and user-defined groups. See
information.
In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT 5.0
(meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses the WAN
VDSL_PoE/ppp0.1 interface.

Interface Grouping

VMG/XMG Series User's Guide
258
C
H A P T E R
Chapter 8 on page 183
15
(Section 15.2 on
for more