EDAN H100N User Manual page 68

H100N Pulse Oximeter User Manual
3.3.11 PR Alarm setup
The user can use PR Hi Alarm and PR Lo Alarm in
menu to adjust pulse rate alarm limits.
By default, PR Hi Alarm and PR Lo Alarm in Neo
mode are 200 and 100 respectively; while they are 120
and 50 in Adu mode respectively.
Set the PR limits as follows:
Choose PR Hi Alarm in the menu, press the
Function button to enter setup. The PR Hi Alarm box
changes from real line to broken line. The adjustable
range of the upper limit of PR Alarm is from "1 + the
lower limit of PR Alarm" to 300.
Press the Up Arrow or Down Arrow button to
increase or decrease values.
Choose PR Lo Alarm in menu, press the Function
button to enter setup. The PR Lo Alarm box changes
from real line to broken line. The adjustable range for
- 60 -
Oximeter Operation