EDAN H100N User Manual page 54

H100N Pulse Oximeter User Manual Oximeter Operation
In menu state or trend graph state, if there is no operation
for 30 seconds, the oximeter will return to measurement
state.
In measurement state, if there is no measurement data
and no operation for 10 minutes, the oximeter will turn
off automatically.
In Data transfer state, if the oximeter does not receive
responsible signals for 10 minutes, it will turn off
automatically.
3.2.4 Data Transfer State
Set Data Storage in menu to ON, the measurement
value will be stored in the oximeter. The SpO and PR
2
information can be transferred from oximeter to
PatientCare Viewer Data Management Software.
Data transfer procedure:
After the measurement and storage are all finished,
turn off the oximeter;
- 46 -