EDAN H100N User Manual page 18

H100N Pulse Oximeter User Manual
35 The temperature sensor should be disinfected
after each measurement. The probe must not be
sterilized in steam. Only detergents containing no
alcohol can be used for disinfection.
36 The temperature sensor should not be heated
above 100
temperatures from 80
37 The calibration of the temperature module is
necessary for every two years (or as frequently as
dictated by your Hospital Procedures Policy). When
you need to calibrate the temperature measurement,
please contact the manufacturer.
WARNING
℃ ℉
(212 ). It should only be subjected to
℃ ℉ to 100
(176 )
- 10 -
Safety Information
℃ ℉ .
(212 )