Table of Contents
Advertisement
28
Fig. 9: Threading the needle thread (one-needle machine) (4)
⑩
⑪
③
A
(3) - Thread tensioning spring
(9) - Thread lever
(10) - Thread regulator
(11) - Hook
8.
Feed the thread around the hook (11) from left to right and then
from bottom to top through the needle thread regulator (10).
9.
Insert the thread from the right to the left through the lower
hole of the thread lever (9).
10. Insert the thread through the upper thread guide (12).
11. Insert the thread through a hole in the lower thread guide (13).
12. Feed the thread through the thread guide (14) on the needle
holder.
13. Unlock the roller foot. Pull the thread through the needle
eye (15) in such a way that the loose thread end faces the
right hook (see Fig. B); Fig. A refers to the hook on the left side.
⑨
⑫
B
⑬
⑭
(12) - Upper thread guide
(13) - Lower thread guide
(14) - Thread guide
(15) - Needle eye
Operating Instructions D887 - 00.0 - 10/2022
Operation
⑮
Advertisement
Table of Contents
