Managing Segments; Setting Program Parameters - DURKOPP ADLER M-TYPE DELTA D887 Operating Instructions Manual

Programming Commander DELTA
Icon Parameter
Additional values (+)
Additional value stitch length (+)
The second value for the stitch length
can be switched on using the button
on the push button panel or the tile on
the control panel.
Additional value needle thread tension (+)
The second value for the needle thread
tension can be switched on using the
buttons on the push button panel or the
tile on the control panel.
Additional value of lower difference (+)
The second value for the difference
can be switched on using a button on
the push button panel, with the knee
button or with the button on the control
panel.
Operating Instructions D887 - 00.0 - 10/2022
5.8.4

Managing segments

You can create, delete and copy segments. Managing the items
is quick and easy thanks to the buttons listed below.
Edit segments
Add segment
Delete segment
Copy and insert a segment
5.8.5

Setting program parameters

There are various options for setting the cross-program parame-
ters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Settings
Value range
1.0 to 12.0 [mm]
(depending on sewing equipment and
subclass)
Value range
1 to 99 [%]
Value range
-6 to 16
117